Original U.S. WWII M3A1 Grease Gun Display by Guide Lamp Company - Serial 273853
Original Item: Only One Available. This is a fantastic ATF compliant non-firing display M3A1 Grease Gun built using 50% of a dummy solid steel receiver along with genuine WWII parts. This wonderful condition Grease Gun was manufactured by the Guide Lamp Company and is complete with US ordnance markings on left side of magazine and serial number 273853. This eye catching example is nicely maker marked and shows the serial number clearly.
It is comprised of totally original WWII parts with the exception of the ATF approved newly made solid steel dummy receiver. This is a ATF approved non-gun making it 100% legal for sale, trade and ownership within the USA. Comes complete with flash hider and one 30 round magazine (high capacity restrictions will apply), a telescoping wire shoulder stock, and fixed peep sights. Barrel is live and unmolested, bolt is welded in the forward position per ATF guidelines.
Its steel stamped construction made this the must less costly successor to the Thompson and Rising sub-machine guns of WWII. It has an interesting safety mechanism that when the bolt is back and the ejector port cover is closed, a tab on the cover holds the bolt in the rear position, even when the trigger is actuated. One must open the ejector port cover in order for the bolt to move forward and fire. We haven't had, or even seen, a Grease Gun dummy gun in nearly 20 years, and we expect it could be another 20 years before we get another. Act now or be sorry later!
The M3 submachine gun, also known as Grease Gun, was developed as a cheaper war-time alternative to famous Thompson M1 and M1928 submachine guns. The basic requirements were set by US Ordnance Corps in February, 1941. George Hyde and Frederick Sampson, working together at Inland Division of general Motors Corp developed a prototype, which was designated the T20. The T-20 was a very simple weapon, made mostly from steel stampings. In November 1942 T20 was tested against several other prototypes, and was found superior to all other contestants. Late in 1942 the T20 was recommended for adoption, which followed in 1943. Combat use of a newly adopted M3 submachine gun showed some problematic points in design, most notably in the failing cocking mechanism. The problems were solved by elimination of this unit in 1944 when a further simplified weapon received the designation M3A1, and served with US Armed forces through the later part of WW2, Korean and Vietnam wars. M3A1 was issued to US tank crews all the way up until 1980s.
M3 submachine gun was a full-automatic blowback-operated firearm that fired from an open bolt. The receiver was made from steel stampings. M3 featured spring-loaded ejection port cover (which also acted as safety, locking the bolt when it is closed) and crank-type bolt retracting (cocking) handle at the right side of the receiver.
Weight: 3.7 kg
Length (stock closed/open): 570 / 745 mm
Barrel length: 203 mm
Rate of fire: ca. 450 rounds per minute
Magazine capacity: 30 rounds
Effective range: 50 meters
This product is not available for shipping in US state(s)
Connecticut, Massachusetts, Minnesota, Wisconsin
This product is not available for international shipping.
- This item is completely legal within the USA. International Military Antiques, Inc observes all Federal, State and Local laws. Everything for sale on ima-usa.com is completely legal to own, trade, transport and sell within the United States of America. Every display machinegun and machine gun parts set and gun sold by IMA, Inc is engineered to be inoperable according to guidelines provided by the US Bureau of Alcohol, Tobacco, Firearms and Explosives (BATF).
Muzzle of barrel has RED PLUG as required by US LAW. Not available for export or in some US locations. This is a replica display gun that can never be engineered to fire a live round therefore no license of any kind is required to purchase this item.
Imitation New Made Inert Gun Laws:-
CALIFORNIA and KANSAS:
Imitation Firearms, regardless of date, may only be shipped:
1. In conjunction with a frame or presentation box; or
2. Solely for export in interstate or foreign commerce; or
3. Solely for use in theatrical or re-enactment productions; or
4. For use in certified sporting events or competitions; or
5. For use in military or civil defense or ceremonial activities; or
6. For public display authorized by public or private schools:
CONNECTICUT, MASSACHUSETTS, WISCONSIN and MINNESOTA:
All replicas of antique firearms (pre-1898) are allowed. We will not ship replicas of modern firearms (post-1898) to these states.
NEW YORK STATE AND PUERTO RICO:
Replicas of antique firearms (pre-1898) are allowed. We will only ship replicas of modern firearms (post-1898) to theatrical, re-enactment, military, police or other government accounts.
- Not eligible for payment with Paypal or Amazon