Original item: One Only. The US Model 1842 Musket was a .69 caliber musket manufactured and used in the United States during the 19th Century. It was a continuation of the Model 1816 line of muskets but is generally referred to by its own model number rather than just a variant of the Model 1816. All of these muskets were 58 inches long, with a barrel around 42 inches in length.

The Model 1842 was the last U.S. smoothbore musket produced. Many features that had been retrofitted into the Model 1840 were standard on the Model 1842. The Model 1842 was the first U.S. musket to be produced with a percussion lock, though most of the Model 1840 flintlocks ended up being converted to percussion locks before reaching the field. The percussion cap system was vastly superior to the flintlock, being much more reliable and much more resistant to weather.

The Models 1840 & 1842 were made with thicker barrel walls, with the intention that they could be rifled later, however this example is still in the original smoothbore configuration. It does however look to have seen a good amount of use, as the barrel now measures out to about 0.704" at the muzzle. It displays a nice aged patina overall, with signs of light past oxidation in areas. The lock plate is marked with the correct American "Federal Eagle" / U.S. under of the hammer, and was produced at the United States Armory and Arsenal at Springfield itself, as indicated on the lock plate tail:

SPRING
FIELD
1845

Many of these muskets were produced under contract, however this example was made at one of the Federal armories. The rifle side plate is thin and not bulged, as typical of the Model 1842 Musket. Previous iterations had had a more pronounced side plate with a bulge in the middle. Due to the amount of use it most likely saw, there is a good amount of powder burn and oxidation around the breech area of the barrel and the cap nipple cone bolster. The cone shows wear and overall oxidation, and there is a bit of rounding on the square bottom portion. In spite of this, the V / P / Eagle's Head proofs on the left side are still visible, though the barrel date is unfortunately completely worn away.

With all iron mounts this .69 caliber musket is in very nice condition, showing a nice aged oxidized patina in many areas, with the previously mentioned powder burn around the cap nipple cone. It still retains retaining both barrel bands and the iron nose cap, as well as the correct "tulip" headed ramrod under the barrel. The lower sling swivel is still present, however the upper swivel broke off at some point, and now the bottom of the barrel band has a fabricated metal loop on it. The butt plate is correctly U.S. marked, and the lock still functions correctly, holding correctly at half cock and firing at full. We checked the bore, and it is still smoothbore, and was not rifled later, as many were, though it does not look to have been cleaned properly after the last use, and shows overall fouling and oxidation.

The walnut stock has a lovely dark red brown color, and shows the expected dents, dings, and other minor damage from service, but no major cracks or repairs. It looks to have had some type of varnish applied long ago, but this could also just be a build up of wax from cleaning. There is a some erosion to the stock behind the cap nipple cone from the corrosive powder. Really a lovely stock with a great "been there" look.

A very nice example of the last smoothbore percussion musket that the United States fielded, still in the original configuration and showing a lovely used patina. Ready to display!

Specifications (Musket):-

Year of Manufacture: 1845
Caliber: .69"
Cartridge Type: Ball and Powder
Barrel Length: 42 Inches
Overall Length: 57 1/2 Inches
Action type: Side Action Percussion Lock
Feed System: Muzzle Loading

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.