-
Original Item: Only One Available. This is a very attractive early production Colt Model 1860 Army .44 caliber percussion revolver, serial number 13760, manufactured in 1861 at the beginning of the American Civil War. It is a desirable early four screw frame example configured to accept a detachable shoulder stock, with the corresponding recoil shield cuts and buttplate notch. It retains its full 8" round barrel, six shot rebated cylinder with a notably strong surviving naval battle scene, matching serial numbers on the major components, a service worn original appearance, and an especially nice bore.
This is an antique black powder firearm manufactured before 1899. Under federal law, it may generally be owned within the United States without a special license or permit and does not require transfer through a Federal Firearms Licensee. However, state and local laws may vary. This firearm is sold solely as a historical collector’s item and has not been test fired or inspected for firing safety by a professional gunsmith. Any mechanical or bore observations provided below describe only its present condition and should not be interpreted as confirmation that the firearm is safe to load or fire. The purchaser is solely responsible for complying with all applicable federal, state, and local laws.
The Colt Model 1860 Army was introduced just before the Civil War as a lighter and more refined .44 caliber successor to Colt's massive Dragoon revolvers. Using an 1851 Navy size frame enlarged and rebated to accept a .44 caliber cylinder, the Model 1860 combined considerable power with a much handier form. Approximately 200,000 were manufactured between 1860 and 1873, and the type became one of the most important Union cavalry and officer sidearms of the Civil War.
This example has the standard early-war configuration with an 8" round barrel, six shot rebated cylinder, brass trigger guard, iron backstrap, and one piece walnut grip. The metal surfaces retain a pleasing gray and brown service patina overall, with no obvious evidence of modern refinishing.
The principal serial number is:
13760
and is found on the barrel, frame, trigger guard, and grip frame. The cylinder and barrel wedge are marked with the abbreviated number:
3760
corresponding to the main serial. The cylinder arbor is instead marked:
686
indicating that this part is a replacement. Based on the numbered components examined, the revolver is therefore best described as mostly matching, with the arbor being the known mismatched component.
Published Colt serial tables place Model 1860 Army serial numbers approximately 2000 through 24999 in 1861, confirming that serial 13760 was manufactured during that year. This places the revolver squarely within the first year of the Civil War, although no specific military issue, unit assignment, or individual wartime use is documented for this revolver.
This is a desirable four screw frame Model 1860 Army. In addition to the normal frame screws, it has the extra pair used to support a detachable shoulder stock. The rear of the frame also has the corresponding cuts in the recoil shields, while the iron backstrap and buttplate arrangement includes the small stock attachment notch. These features identify the revolver as one of the early Model 1860s manufactured with provision for Colt's detachable shoulder stock.
The top of the barrel is clearly marked:
— ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA. —
while the left side of the frame retains the familiar:
COLTS
PATENT
marking. The revolver does not carry a visible "44 CAL" marking on the left shoulder of the trigger guard. Variations in this marking are encountered on early Model 1860 production, and its absence by itself should not be regarded as evidence of alteration.
The rebated cylinder is particularly appealing, retaining an estimated approximately 65% of its roll engraved naval battle scene. After the earliest fluted cylinder production, Colt adopted the rebated round cylinder with the W. L. Ormsby naval engagement scene that became standard on the Model 1860 Army. The surviving scene on this example is considerably stronger than that seen on many service used revolvers.
The cylinder also retains much of the marking:
COLT'S PATENT №
adjacent to its abbreviated serial number. The rear face originally incorporated six small safety pins between the percussion nipples, allowing the hammer to rest between loaded chambers. On this revolver most of those pins have been worn down or damaged, a common condition on well used percussion Colts.
Several small single letter inspection or assembly marks are also visible on individual components. Early Model 1860 Army revolvers are known with a variety of such inspection marks, although no readable military grip cartouches remain on this example.
The one piece walnut grip remains in very good service used condition and retains its original overall shape. The wood now sits slightly below the surrounding grip frame in areas, most likely the result of repeated handling, cleaning, and refinishing over its long life. We do not see any legible government inspection cartouches remaining on either side.
The revolver is mechanically complete and operates well during careful manual inspection. The hammer cycles correctly, the cylinder indexes accurately, and cylinder lockup is solid. The trigger release is unusually light and should be regarded as a very sensitive or near hair trigger condition rather than as normal factory adjustment.
The revolver also disassembles in the normal Colt manner. The barrel wedge can be removed and the barrel assembly separated from the frame, and the barrel-to-frame fit is presently tight and solid.
The bore is in excellent condition, with a bright interior and crisp, well defined lands and grooves. Colt's progressive or gain twist rifling remains readily visible. There is only minor evidence of old fouling and oxidation, concentrated mainly near the muzzle, and the bore is one of the strongest condition features of the revolver.
All six percussion nipples remain present and open. They show expected service wear, oxidation, and some deformation at their outer edges from repeated hammer contact. The overall condition of the cylinder face and nipples is consistent with an arm that was actually used rather than preserved unused.
With its early 1861 manufacture date, desirable four screw shoulder stock frame, mostly matching serial number 13760, strong surviving cylinder scene, excellent bore, solid mechanics, and honest service patina, this is a particularly appealing early Civil War Colt Model 1860 Army. It would make a strong addition to a collection of Civil War sidearms, early Colt percussion revolvers, U.S. cavalry weapons, or shoulder-stock capable Model 1860 variants.
Specifications:
Year of Manufacture: 1861
Manufacturer: Colt’s Patent Fire Arms Manufacturing Company
Model: 1860 Army Percussion Revolver
Serial No.: 13760
Caliber: .44cal
Ammunition Type: Cap and Ball
Barrel Length: 8 inches
Overall Length: 14 inches
Action: Single
Feed System: 6 Shot Revolver
Federal Classification: Pre-1899 Antique
The Colt Army Model 1860 is a muzzle-loaded cap & ball .44-caliber revolver used during the American Civil War made by Colt's Manufacturing Company. It was used as a side arm by cavalry, infantry, artillery troops, and naval forces.
The Colt 1860 Army uses the same size frame as the .36 caliber 1851 Navy revolver. The frame is relieved to allow the use of a rebated cylinder that enables the Army to be chambered in .44 caliber. the barrel on the 1860 Army has a forcing cone that is visibly shorter than that of the 1851 Navy, allowing the Army revolver to have a longer cylinder. Another distinguishing feature of the Colt 1860 Army, first introduced on the Colt 1855 Sidehammer Revolver, is the "creeping" loading lever.
More than 200,000 were manufactured from 1860 through 1873. Colt's biggest customer was the US Government with no less than 129,730 units being purchased and issued to the troops. The weapon was a single-action, six-shot weapon accurate up to 75 to 100 yards, where the fixed sights were typically set when manufactured. The rear sight was a notch in the hammer, only usable when the revolver was fully cocked.
The Colt .44-caliber "Army" Model was the most widely used revolver of the Civil War. It had a six-shot, rotating cylinder, and fired a 0.454-inch-diameter (11.5 mm) round spherical lead ball, or a conical-tipped bullet, typically propelled by a 30-grain charge of black powder, which was ignited by a small copper percussion cap that contained a volatile charge of fulminate of mercury (a substance that explodes upon being subjected to a sharp impact). The percussion cap, when struck by the hammer, ignited the powder charge. When fired, balls had a muzzle velocity of about 900 feet per second (274 meters/second), although this depended on how much powder one loaded it with.
The unfluted cylinder was 'rebated,' meaning that the rear of the cylinder was turned to a smaller diameter than the front. The barrel was rounded and smoothed into the frame, as was the Navy Model. The frame, hammer, and rammer lever were case-hardened, the remainder blued; grips were of one-piece walnut; and the trigger guard and front grip strap were of brass while the backstrap was blued."
A distinguishing feature of the Model 1860 was that its frame had no top strap, or no component running above the cylinder. Instead, its strength came from the lower frame and the massive fixed cylinder pin. This made the gun slimmer and lighter than its main competitor, the Remington Model 1858, but with a possible loss of strength. The fixed cylinder pin also meant that the barrel had to be removed in order to remove the cylinder, unlike the Model 1858, which only required you to remove the cylinder retaining pin.
History
By April 1861, 2,230 of Colt's earliest production went to dealers south of the Mason-Dixon line. The United States Navy ordered 900 fluted cylinder revolvers in May 1861 later issued to ships enforcing the Atlantic and Gulf blockade. United States Army orders also began in May, and 127,157 had been delivered before a 5 October 1864 fire put Colt's factory out of operation for the duration of hostilities.
Operation
Loading is a somewhat lengthy process, with each of the six chambers drilled into the revolving cylinder being loaded from the front, or "muzzle" end. A measured amount of black powder is poured into a chamber. Next a lead ball is placed at the opening of the chamber and seated by firmly pressing it in with the pivoting loading lever which is attached beneath the barrel of the revolver. For sealing each chamber, an over-size 0.454-inch-diameter (11.5 mm) lead ball is trimmed slightly by the rim of the chamber as the rammer forces it inside. Cap and ball shooters also often place a lubricated wad between balls and powder, or, alternatively, pack lard or a commercially-sold bore lubricant at the mouth of each chamber in an attempt to prevent powder in an adjacent chamber from being ignited by when the gun is fired, which is known as a chainfire.
When the Colt Model 1860 was used by 19th century soldiers, they most often loaded the gun using paper cartridges. These cartridges consisted of a pre-measured load of black powder and a ball, wrapped in nitrated paper (paper that had been soaked in potassium nitrate and then dried, to make it more flammable). To load each chamber, one only had to slip the cartridge into the front of the chamber and seat the ball with the loading lever ram. Then a percussion cap was placed onto the raised aperture, called a nipple, at the back end of the chamber.
The Colt 1860 cost approximately $20 per revolver. This was rather expensive during the 1860s, both for the United States Army and private citizens. Colt had been criticized by this high price, and by 1865 the revolver was reduced to $14.50.
The Colt "Army" revolver is to be distinguished from the Colt "Navy" revolver of which there were two models, the octagonal barrel Model 1851 Navy, and the round-barreled Model 1861 Navy, both Navy models being in the smaller .36-caliber.
NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.
- This product is not available for shipping in US state(s): New Jersey, and New York
This product is available for international shipping.
- Not eligible for payment with Paypal or Amazon
IMA considers all of our antique guns as non-firing, inoperable and/or inert. Title 18, U.S. Code, Section 921(a)(16) defines antique firearms as all guns made prior to 1899. This law exempts antique firearms from any form of gun control or special engineering because they are not legally considered firearms. No FFL, C&R or any license is required to possess, transport, sell or trade Antique guns. All rifles and muskets sold by IMA that were manufactured prior to 1899 are considered Antiques by the US BATF (United States Bureau of Alcohol, Tobacco & Firearms). Therefore, all of IMA's Antique guns may be shipped to all US States and most nations around the world.
These antique guns are not sold in "live" condition, and are not tested for the the ability to feed or load any type of cartridge. They are sold as collector's items or as "wall hangers" not for use, and we make no guarantees regarding functionality aside from what is stated in the description. Any attempt at restoring an antique gun to be operational is strongly discouraged and is done so at the risk of the customer. By purchasing an antique gun from IMA you thereby release IMA, its employees and corporate officers from any and all liability associated with use of our Antique guns.
Pre-1899 Manufacture, no licenses required, allowed to ship to almost any deliverable address across the globe. Please note that for international shipping, these MUST be shipped using UPS WW Services.
Frequently Asked Questions
Yes, in most jurisdictions, antique firearms are legal to own and are generally not subject to the same regulatory requirements as modern firearms. Under U.S. federal law, any firearm manufactured on or before December 31, 1898, is classified as an antique firearm and is not considered a firearm under the Gun Control Act of 1968. As such, no federal license or FFL (Federal Firearms License) transfer is required for purchase or possession. Antique firearms may be legally shipped to most U.S. states and to over 25 countries worldwide via UPS, subject to applicable shipping and import/export restrictions. Please note: Firearms laws vary by country, state, and locality, and are subject to change. It is your responsibility to consult with local law enforcement or a qualified legal professional to ensure compliance with all relevant laws and regulations in your area.
We Buy Military Antiques
Our team expert buyers travels the world to pay fair prices for entire estate collections to singular items.
START SELLING TODAY
