Original U.S. Burnside Rifle Company Model 1865 Spencer Repeating Carbine - Serial Number 29320
Original Item: Only One Available. This is a very nice condition genuine Burnside Rifle Company Model 1865 Spencer Repeating Carbine. Functions great with decent bore: clear lands and grooves but some areas of corrosion from lack of cleaning over the decades. Metal finish is good with a great patina of age.
The March 1865 incorporation of the Stabler cut-off attachment, which was invented by Edward Stabler of Sandy Springs, Md. It allowed the carbine to be fired as a single-shot with the seven cartridges in the magazine being held in reserve. Stabler was paid a royalty of 25 cents for each carbine fabricated with his magazine cut-off device.
On June 27, 1864, the Burnside Rifle Co. entered into a contract with the Ordnance Dept. to manufacture 30,500 .52-cal. M1860 Spencer carbines with deliveries completed by Aug. 31, 1865. With the changes directed to be made to the carbines, deliveries did not start until April 15, 1865, and they continued until the end of October, with a 30,496 M1865 Spencer carbines being delivered. Six additional carbines were delivered as samples, prototypes and models. Of this number, 14,494 were equipped with the Stabler cut-off and 16,008 without.
The company paid Spencer Repeating Rifle Co. a royalty of 50 cents for each carbine delivered to the Ordnance Dept., and $1 was paid for the 4,000 Spencer carbines sold to military individuals and civilians.
The Spencer factory manufactured nearly 23,000 M1865 Spencer carbines, of which 12,502 were equipped with the Stabler cut-off. In the post-war period, Springfield Armory retrofitted about 12,000 M1860s to incorporate M1865 features.
The .56-50-cal. M1865 Spencer carbines manufactured by the Burnside Rifle Co. and the Spencer Repeating Rifle Co. weighed 8 pounds, 5 ounces with 20-inch barrels, and they had an overall length of 37 inches. The Burnside receivers were stamped:
SPENCER REPEATING RIFLE
PAT'D MARCH 6, 1860
MANUFACTURED AT PROV. R. I.
BY BURNSIDE RIFLE CO.
The Spencer factory carbines had the both the M1860 stamping and the M1865. A saddle bar and ring was located on the buttstock's left, and sling swivels were located on the barrel band and underside of the buttstock.
In 1871, Springfield Armory converted 1,109 M1865 Spencer carbines manufactured by Burnside into rifles, replacing the carbine barrels with 32-inch-long standard M1868 Springfield rifle barrels and fore-ends secured by two barrel bands. The converted rifles retained the carbine's saddle bars and rings on the left side of their buttstocks. It does not appear that those converted rifles were ever issued.
Both Spencer and Burnside carbines were manufactured by the Burnside Rifle Company. Spencer-manufactured models featured six-groove rifling, while those made under contract by Burnside in 1865, as well as post-war armory conversions, used three-groove rifling. Spencer carbines came into use in mid-1863 and by war's end, they had become established as the dominant cavalry arm of the Union Army. Spencers continued to see action on the frontier during the Indian Wars. After the Civil War, Spencers were armory-modified from their original .52 caliber to accept .50 caliber ammunition.
This product is not available for shipping in US state(s)
This product is available for international shipping.
- IMA considers all of our antique guns as non-firing, inoperable and/or inert. Title 18, U.S. Code, Section 921(a)(16) defines antique firearms as all guns made prior to 1899. This law exempts antique firearms from any form of gun control or special engineering because they are not legally considered firearms. No FFL, C&R or any license is required to posses, transport, sell or trade Antique guns. All rifles and muskets sold by IMA that were manufactured prior to 1899 are considered Antiques by the US BATF (United States Bureau of Alcohol, Tobacco & Firearms). Therefore, all of IMA's Antique guns may be shipped to all US States and most nations around the world.
These antique guns are not sold in live condition. They are sold as collector’s items or as wall hangers. Any attempt at restoring an antique gun to be operational is strongly discouraged and is done so at the risk of the customer. By purchasing an antique gun from IMA you thereby release IMA, its employees and corporate officers from any and all liability associated with use of our Antique guns.
Pre-1899 Manufacture, no licenses required, allowed to ship to almost any deliverable address across the globe.
Not eligible for payment with Paypal or Amazon