Original U.S. Antique Colt .45cal Single Action Army Revolver with 5" Barrel made in 1876 - Matching Serial 30025
Original Item: Only One Available. This is every School boy's dream! A real Cowboy six gun! This Colt SAA (Single Action Army) Revolver has a "gunfighter friendly" 5 inch barrel with lovely aged walnut grips. It looks like the barrel may have been shortened, as the front sight is not original. There is also an 1856 dated "Seated Liberty" Dime inlaid into the right grip scale, a common personalization seen on frontier used guns.
The revolver's serial number is 30025, which dates production to 1876. It has the serial number on the frame, trigger guard, grip frame, and even 0025 on the cylinder. Serial numbers were not stamped onto the cylinders from 1883-1912, making this a rare treat as a confirmed matching number revolver. There is also assembly number 3300 marked on the loading gate. It is in full working order and condition, showing a gorgeous worn patina of age, sure to delight any "Old West" Americana collector.
The markings on the top of the barrel are still clear:
COLT'S PT. F. A. MFG. CO. HARTFORD. CT. U.S.A.
The left side of the frame has the Colt patent dates all clearly legible:
PAT. SEPT. 19. 1871.
PAT. JULY. 2. 1872.
These are the early pattern markings without the 1875 patent date, and this was made before the "Prancing Pony" logo began appearing on the frame. The markings are all relatively clear, so this revolver does not look to have been refurbished at any time, and it does not look to have been refinished. There is no caliber marking on the revolver, not needed during early years before other calibers were introduced. However we have still checked with a cartridge to confirm. This revolver is definitely chambered for .45 Colt, also known as .45 "LONG" Colt, one of the most legendary handgun cartridges of the old west. When you hear people talk of a "Colt 45", this model gun is the reason why.
This revolver looks to have been blued from the start, however now most parts are worn to a gray patina. The grips look to be original, and have a great worn look, some notches cut into the bottom of the grip on the right side, possibly a gunfighting tally. The barrel was looks to have been cut down at some point to be more "cowboy friendly", and a new nickel silver front sight put in place.
Mechanically, the action is smooth, with a good cylinder lock up, and crisp dry fire. The action has all four clicks, and cycles correctly. We did not notice any of the usual finicky behavior we often see from these revolvers. The bore is nice, with clear lands and grooves and a dull finish, with some areas of oxidation. The ejector door swings open easily, and the ejector itself works great. Overall this is a great pistol!
Pistols such as this are extremely difficult to find today at any reasonable price. This example is just ideal for any Wild West Collection. A great collector's revolver, ready to display!
History of the Colt Single Single Action Army
Bound by the Rollin White patent (#12,648, April 3, 1855) and not wanting to pay a royalty fee to Smith & Wesson, Colt could not begin development of bored-through revolver cylinders for metallic cartridge use until April 4, 1869. For the design, Colt turned to two of its best engineers: William Mason and Charles Brinckerhoff Richards who had developed a number of revolvers and black powder conversions for the company. Their effort was designed for the United States government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and adopted as the standard military service revolver. Production began in 1873 with the Single Action Army model 1873, also referred to as the "New Model Army Metallic Cartridge Revolving Pistol".
The very first production Single Action Army, serial number 1, thought lost for many years after its production, was found in a barn in Nashua, New Hampshire in the early 1900s. It was chambered in .45 Colt, a centerfire design containing charges of up to 40 grains (2.6 g) of fine-grained black powder and a 255-grain (16.5 g) blunt roundnosed bullet. Relative to period cartridges and most later handgun rounds, it was quite powerful in its full loading.
The Colt Single Action Army revolver, along with the 1870 and 1875 Smith & Wesson Model 3 "Schofield" revolver, replaced the Colt 1860 Army Percussion revolver. The Colt quickly gained favor over the S&W and remained the primary US military sidearm until 1892 when it was replaced by the .38 Long Colt caliber Colt Model 1892, a double-action revolver with swing-out cylinder. By the end of 1874, serial no. 16,000 was reached; 12,500 Colt Single Action Army revolvers chambered for the .45 Colt cartridge had entered service and the remaining revolvers were sold in the civilian market.
The Colt .45 is a famous piece of American history, known as "The Gun That Won the West". The Single Action army is a very popular firearm, even today, and it continues to be produced in various configurations.
Year of Manufacture: 1883
Caliber: .45 "Long" Colt
Ammunition Type: Centerfire Cartridge
Barrel Length: 5 inches
Overall Length: 10 3/8 inches
Action: Single Action
Feed System: 6 Shot Revolver
This product is not available for shipping in US state(s)
This product is not available for international shipping.
IMA considers all of our antique guns as non-firing, inoperable and/or inert. Title 18, U.S. Code, Section 921(a)(16) defines antique firearms as all guns made prior to 1899. This law exempts antique firearms from any form of gun control or special engineering because they are not legally considered firearms. No FFL, C&R or any license is required to posses, transport, sell or trade Antique guns. All rifles and muskets sold by IMA that were manufactured prior to 1899 are considered Antiques by the US BATF (United States Bureau of Alcohol, Tobacco & Firearms). Therefore, all of IMA's Antique guns may be shipped to all US States and most nations around the world.
These antique guns are not sold in live condition. They are sold as collector’s items or as wall hangers. Any attempt at restoring an antique gun to be operational is strongly discouraged and is done so at the risk of the customer. By purchasing an antique gun from IMA you thereby release IMA, its employees and corporate officers from any and all liability associated with use of our Antique guns.
Pre-1899 Manufacture, no licenses required, allowed to ship to almost any deliverable address across the globe. Please note that for international shipping, these MUST be shipped using UPS WW Services.
- Not eligible for payment with Paypal or Amazon