Original Item: Only One Available. This is one of the great romantic era Imperial German Army Revolvers, and this is a rare Navy Issued example. The M1879 and M1883 Reichsrevolvers, or Reichs-Commissions-Revolver Modell  1879 and 1883, were service revolvers used by the German Army from 1879 to 1908, when they were superseded by the Luger. The Model of 1879 was issued with a 7" 10.6mm x 25R mm Barrel, which sported a rather fancy ring to the muzzle. In 1883 they introduced a shorter barrel version that had only a 5" barrel, the M1883. Although the design was dated, the weapon was extremely robust, and they were still used through World War I. The M1879 is referred to as the "cavalry model" and the M1883 as the "officer's model," by collectors, which were not official designations.

These revolvers were single action only and were fitted with a robust safety lever on the left hand side of the frame, which functions differently depending on hammer position. If the hammer is in the fire position, the safety locks the hammer completely. If in the half-cock position, it locks the hammer there, facilitating reloading of the revolver or removal of the cylinder. They also have a very robust ring on the bottom of the grip, for securing the revolver to the uniform.

There were made by various different makers,and this example is marked CROWN / ERFURT, indicating manufacture at the Imperial Arsenel in Erfurt Germany. Our Revolver also bears all matching serial number 8795, even on the inside of the grip scales (795) and the small screws (95). It is also marked with the caliber 10,6 on the left side of the barrel, and there are various proof marks on the different parts of the gun.

The pommel plate is is marked with the Crown / FW proof on the butt, for German Emperor Wilhelm I, who used this cypher during his reign 1861-1888. The back strap of the grip is marked with German regimental designation 51. A. 4. 154., which we believe indicates issue to an artillery regiment, though we do not know if this would indicate field or foot artillery. There is also a stamped out regimental number on the opposite side of the grip which also has the large A for artillery. Definitely a great research opportunity for those so inclined.

The revolver is in very good condition, and the metalwork condition is solid. Many parts of the revolver still have a lot of blued finish present. Bore is bright with clear lands and grooves, with some areas of oxidation, the loading gate works perfectly, and mechanically the action is very tight.

In full working order, very substantial and a great example of a solid German design. Ready to display!

Specifications: 

Year of Manufacture: circa 1885
Caliber: 10.6×25mmR
Ammunition Type: Centerfire Cartridge
Barrel Length: 5 inches
Overall Length: 10 inches
Action: Single Only
Feed System: 6 Shot Revolver

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.