Item Description
Original Item: Only One Available. This is a very nice transitional pattern SA Dagger, made by the very seldom seen firm of Wilhelm Kober & Co., based in Suhl, Germany. This maker is EXTREMELY rare to find, and this is only the fifth edged weapon of any type we have had by this firm. This company had made SA daggers since the Röhm era, but only made them in limited numbers throughout the war. It comes comes compete with an original scabbard, which is the early war pattern.
Unlike an early pattern dagger, this example has plated alloy fittings throughout, not the early solid nickel silver with a Gruppe/Gau marking. Otherwise, the dagger is the same as an early pattern, and does not have any RZM markings on the blade. The crossguards and tang nut are in very good condition throughout with all fittings having a nice lightly aged patina. There is some age to these mounts and there is some lifting near the edges, showing that they are plated. There is no major damage, just the usual wear from service and age.
The grip is a fine product having a lovely reddish brown color, with medium center ridge construction, showing light to moderate wear on the wood. There is no major cracking, but there are some dents, scratches, and small gouges around the edges and on the ridge. The grain is lovely on this example, with some lovely color variation. This grip is in good condition and fits the crossguards nicely, and we do not see any cracks near either guard. The pommel nut shows no turning, however the hilt is overall a bit loose.
The SA symbol button is still nicely set, and still has most of the enamel intact, with the nickel plating intact with a bit of verdigris around the edge. The grip eagle is a fine example being the style with beak that points straight. It has just a bit of verdigris on it, showing that it is solid nickel alloy, and it has patinated nicely. The details are still there to the eagle to include the beak, breast feathering, wing feathering, talons, wreath and mobile swas (hook cross).
The blade is in good condition, still showing some of the original factory final grind cross grain on both sides. This texture is iconic, and is the definitive identifying characteristic for a real WWII German Blade. It also shows some past staining and oxidation from water, now cleaned away. Unfortunately, at some time (probably recently), someone used a pull / wedge sharpener to put a cutting edge on the blade, starting about an inch from the ricasso. This has removed some material from the blade, and was not really well done. These daggers were not intended for real use, and as such were not sharpened when issued.
The acid-etched Alles für Deutschland (Everything for Germany) SA motto is crisp, with the factory darkening mostly worn away, and there is also some runner wear on both sides, as with just about every other German dagger out there.
This fine example was produced by Wilhelm Kober & Co., a known Suhl-based producer of this knife during the pre-WWII period. The rear of the dagger is marked with the trademark "Centaur with a fore-leg raised, brandishing a gun" logo, surrounded with a double oval:
WILH. KOBER & CO.
(Centaur Logo)
GEGR.
1874
SUHL
The "GEGR." is short for Gegründet, or founded, as this company was founded in 1874, and according to the DRABS for 1900-1925 was mainly a maker of mechanical hair clippers. They made some attempts to diversify into small electric motors, and only "a few early type SA and NSKK daggers were made during the Third Reich" per J. Anthony Carter's GERMAN KNIFE AND SWORD MAKERS. All of them were marked with this trademark, which was used specifically on these knives. Knives by this maker are extremely rare.
The scabbard shell is the early-war style, which were produced with a brown "anodized" finish on the steel, which was then lacquered. There are two substantial "crease" style dents on the reverse, however it still retains much of the original finish, with about 80% of the lacquer still remaining. There is some oxidation and wear to the anodized color where the lacquer is gone. The upper and lower fittings are solid nickel silver, with a great look and some dents and scratches showing typical wear. The chape is dented at the end, though not split, as the nickel alloy is somewhat soft, a common thing to see. The throat nicely matches the crossguards, and all fittings have their original dome headed screws, which do not show any signs of turning.
A nice early war SA dagger from a very rare maker, complete with a very good original scabbard. Ready to display!
Specifications:
Blade Length: 8 3/4"
Overall length: 13 3/4”
Crossguard: 3”
Scabbard Length: 10”
History of the SA-
The SA or Brown Shirts, were a private political formation which Adolf AH and the NSDAP used to maintain order at organized Party meetings and demonstrations. The group was formed in 1921, and grew to a huge force of nearly 3,000,000 men by the later 1930's. To instill esprit de corps, as well as create employment for the Blade City of Solingen, it was decided each SA man would carry a dagger with his Brown Shirt uniform. Huge quantities needed to be produced to accommodate the demand. The dagger initially was produced of hand-fitted nickel mounts with attractive finished wood grip and brown anodized (a bluing process) finished scabbard.
The blade was etched with the SA motto, Alles für Deutschland. Examples produced prior to 1935 were stamped with the German sector of the SA group on reverse lower crossguard. Later examples underwent standardization through the RZM ministry. These pieces were produced of cheaper plated zinc-base fittings and scabbards were simply painted brown.
Prior to his "unmasking" as a traitor, Ernst Röhm was the leader of the SA. In 1934, he distributed approximately 100,000 SA daggers with his personal inscription on the reverse blade. These daggers were to honor individuals who had served with the SA prior to December, 1931. Other than the inscription, these pieces were identical to the standard M1933 SA dagger. After the Röhm purge, the inscription was ordered to be removed. Many examples were returned to the factory for grinding. Others were simply ground in the field by whatever means were available. Examples will occasionally be encountered with remnants of the original inscription remaining on the blade, but mostly none will remain. Some blades exist with an intact inscription, reflecting only the removal of the Röhm signature. Very very rarely is an example seen with a full, untouched inscription, as the holder would have surely risked a charge of treason.
- This product is available for international shipping. Shipping not available to: Australia, France, or Germany
- Due to legal restrictions this item cannot be shipped to Australia, France or Germany. This is not a comprehensive list and other countries may be added in the future.
- Not eligible for payment with Paypal or Amazon