Item:
ONSV21SOS146

Original German WWII Service Used M40 Single Decal Army Heer Helmet with 57cm Liner & Chinstrap - NS64

Item Description

Original Item: Only One Available. This is a very nice all original example of a Named German Model 40 Steel helmet, as issued to the Wehrmacht Heer (army). It shows service wear in the form of light oxidation and paint chipping, so it most likely saw service for a long period in a damp environment. This stamped sheet steel construction helmet retains 75% of its original lightly textured "panzergrau" paint. The left side of the helmet features a worn Heer eagle decal, which is retained about 60%. There are areas of rust speckling on many areas of shell, inside and out. This is a very nice example of the M40 helmet, with a great service worn look!

The reverse, interior, neck guard apron is lot number stamped 156 and the interior, left side, apron has the stamped manufacturer's code and size NS64, indicating that it was manufactured by Vereinigte Deutsche Nikelwerke, of Schwerte, Germany. Size 64 is a nice medium size that can accommodate liners from 56cm to 57cm or US 7 to 7 1/8. Size 64 shells are harder to find and are therefore more valuable to a collector.

All three original liner retaining pins are intact with most of the original paint still intact. The interior of the helmet still has an original M31 leather liner with all eight fingers still present, showing light wear and staining from service. The original top tie is present, but has been broken in several places and knotted together, so it does not go through all of the fingers anymore. There is some corrosion on the side of band, so we cannot see the size marking, however the leather itself is stamped 57 in a circle. The right side displays the full manufacture information, as well as a date, though it is very faintly stamped:

SCHUBERTH-WERKE K.-G.
D. R. P.
1940
BRAUNSCHWEIG

The chinstrap is intact, with the correct steel buckle and securing studs. There is a faint maker mark on the leather, which is now somewhat delicate due to age and drying out.

Overall a very nice Named M40 Single Decal Heer Army helmet, with loads of patina! M40 helmets of this quality are always the hardest to find on the market. This is an item that will only continue to appreciate in value over time.

The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.

The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.

  • This product is available for international shipping.
  • Not eligible for payment with Paypal or Amazon

YOU MAY ALSO LIKE

Cash For Collectibles