Original German WWII Named Army Heer M42 Single Decal Helmet with Partial Liner - Size 64 Shell
Original Item: Only One Available. This is a very nice all original service worn example of a German Model 42 Steel helmet, as issued to the Wehrmacht Heer (army). This stamped sheet steel construction helmet retains about 60% of its original finish, showing a fantastic service worn look that is impossible to duplicate. There are scratches and light oxidation on the exterior, but no major damage or rust. The left side of the helmet features a very nice Heer eagle decal. The decal is retained about 75%, with some small areas chipped out with the paint, and shows overall wear. A great service worn helmet with a very nice decal!
We checked the shell thoroughly, and unfortunately we were not able to find a maker marking, as it looks like there is oxidation at the rear under the skirt, where late ware M42 markings are stamped. We measured the outside, and it is definitely a size 64 shell, a nice medium size which can accommodate size 56-57 liners. The larger size makes these harder to find and more desirable to a collector. At the rear the shell is also named to what looks like Kan. Schmiski. There is also still a faint 'Dome Stamp' on the inside of the helmet, something we rarely see!
All three liner retaining pins are intact, though they have lost much of their original paint. The interior of the helmet still has the original M31 leather liner present, however most of the fingers have torn off, with the rest of the leather in delicate condition. There is splitting over the rim, and it looks to have seen quite a bit of use. The late war issue galvanized steel liner band is marked on the left outer side with 64 nA / 57, indicating that the liner is a size 57, intended for a 64 shell. We checked the right side, and there are some very faint markings where the maker marking would be, however we cannot make them out at all. The chinstrap is unfortunately completely missing.
Overall a very nice service worn M42 Single Decal Heer Army helmet with a partial liner and a great patina! M42 helmets of this quality are always the hardest to find on the market. This is an item that will only continue to appreciate in value over time.
The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.
These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.
In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.
The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.
The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.
The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.
The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.
- This product is available for international shipping.
- Not eligible for payment with Paypal or Amazon