Item:
ONJR25MYFD10

Original German WWII MG 42 Display Machine Gun with Basket Belt Carrier and Bipod - Scrubbed Receiver Markings

Item Description

Original Item: Only One Available. Constructed from a legally demilitarized (de-milled) parts set, this is a wonderful and rare German WWII MG42 Display Gun. It is built from all original parts on an original BATF compliant non-firing display receiver, making this a 100% legal display machine gun. This receiver was created by using portions of the original torch cut receiver, including the barrel bushing, combined with some new made solid steel portions. It has properly had a 25% section of the total length completely replaced entirely with solid steel bar stock. Meaning a 1/4 length section of the display receiver is solid steel, making this totally legal to own without a license of any kind.

Condition-wise, it is one of the best we have seen in years, though it does look like the receiver had the markings scrubbed and was refinished, so unfortunately none of the markings on the rear receiver remain. We can see that it had the rails inside for the bolt, and there is actually a deactivated bolt assembly inside the rear receiver, along with part of the recoil spring, all welded in place to help give it a great look, even with the top cover open.

The gun has a lovely blued finish, and comes complete with German WWII issue parts including a wooden butt-stock, bipod, and a post-war apple green repainted drum belt carrier. This example even has a fully functioning barrel change assembly! Please note that the barrel must be in the forward position for it to open (nose down) so it slides down to clear the locking cam, after which the door can be opened and the barrel removed. The metal finish and overall condition is excellent, and it will make a fantastic addition to any WWII Collection.

As noted previously, all of the markings on the receiver were removed, as they are quite shallow, and the entire gun looks to have been reconditioned at arsenal. The top cover was probably also refinished, and does not have a German three letter code marking anymore, just serial number 1900. However there is faint Waffenamt WaA147 marked, which was only used by the inspector at Johannes Grossfuss of Dölbeln in Sachsen, a known maker of feed trays and top covers for both the MG 34 and 42. We checked the bottom feed tray, and it is marked with cof, for Carl Eickhorn of Solingen, a legendary manufacturer of edged weapons, and a known make of top covers, feed trays, and other MG 34 and 42 components. There also look to be some faint Waffenamt inspection markings on the smaller components of the top cover and upper feed mechanism.

The trigger assembly is not maker marked, however it has two Waffenamt WaA519 stamps on the left side, as well as an Eagle / 519 stamp on the trigger itself. This is the inspector based in Solingen, Germany, and is often seen on Eickhorn manufactured MG 34 and 42 parts, so it's possible that the trigger assembly was made by this company as well.

The top of the barrel change / trunion assembly shoe is marked with ar, for the legendary Mauser-Werke AG in Berlin-Borsigwalde. This company needs no introduction, and is arguably the most famous and well-known German maker of arms during the late 19th Century up until the end of WWII. Originally founded by King Frederick I of Württemberg as the Königliche Waffen Schmieden (Royal Weapons Forges) on 31 July 1811, it rose to fame once taken over by two sons of Master Gunsmith Andreas Mauser: Wilhelm & Paul Mauser. The contributions that Paul Mauser made to the firearms world can hardly be overstated. After his passing in 1914, the company continued to innovate and product weapons. It still exists today as a weapons manufacturer. With this marking, it is possible that the receiver itself was also made by Mauser or one of its subcontractors, but with the scrubbed markings it is unfortunately impossible to tell.

The bipod is the correct type and is in great shape, with the desirable center height adjustment knob. It is maker marked kur 43 on the left side of the central hub, for Steyr-Daimler-Puch AG, Werk Graz, Fuhrhofsgasse 44, production in 1944. On the right of the central hub is a faint Waffenamt WaA815 marking, correct for this factory. The rear wooden butt stock is in lovely condition, and can still be detached from the receiver. As with many we see, it has been painted with a thick black almost rubber like coating.

The front and rear sight still flip up and function correctly, and the bipod folds away and locks in correctly. The trigger is present, and still works great with intact internal springs and safety selector. The belt drum fits well, locking into place, and could easily be fitted with a belt and/or starter tab to complete the look.

Offered in excellent condition this is a very hard to find all German WWII mg42 Display Machine Gun. We only get these a few times a year, if we are lucky, so act quickly as they never last long.

Note: as these were in service post war, some components may display Yugoslav stock markings in addition to German wartime markings.

The MG 42 (shortened from German: Maschinengewehr 42, or "machine gun 42") is a 7.92×57mm Mauser general purpose machine gun designed in NSDAP Germany and used extensively by the Wehrmacht and the Waffen-SS during the second half of World War II. It was intended to replace the earlier MG 34, which was more expensive and took much longer to produce, but in the event, both weapons were produced until the end of the war.

The MG 42 has a proven record of reliability, durability, simplicity, and ease of operation, but is most notable for its ability to produce a high volume of suppressive fire. The MG 42 had one of the highest average cyclic rates of any single-barreled man-portable machine gun: between 1,200 and 1,500 rpm, resulting in a distinctive muzzle report. The only Allied automatic ordnance of any type with a similar calibre that was designed to exceed this rate of fire was the Soviet Union's .30-calibre ShKAS machine gun for aircraft armament, due to its "squirrel-cage" layout, ten-round "pre-feed" mechanism giving it a firing rate of 1,800 rounds per minute.

One of the weapon's most notable features was in its exceptionally high rate of fire of about 1,200 rounds per minute, twice the rate of the Vickers and Browning machine guns, which fired at a rate of about 600 rounds per minute. So effective was the weapon in laying suppressive fire that the United States Army created training films to aid its soldiers in dealing with the psychological trauma of facing the weapon in battle. The MG 42 fired at such a high rate the human ear could not easily discern the sound of individual shots being fired, instead hearing a sound described as like "ripping cloth" or a buzzsaw, giving rise to the nickname "AH's buzzsaw" (and the German soldiers' AHsäge ("AH's saw" or "bonesaw").

The gun was sometimes called "Spandau" by British troops, as was the MG 34, a traditional generic term for all German machine guns, left over from the famous Allied nickname for the MG 08 Maxim-derivative used by German forces during WWI, which was derived from its manufacturer's plates noting the city where some were produced.[citation needed]

The MG 42's high rate of fire resulted from analysis concluding that since a soldier typically only has a short period of time to shoot at an enemy soldier, and muzzle rise quickly throws off initial aim, it was imperative to fire the highest number of bullets possible in the shortest time to increase the likelihood of a hit before the recoil overcame the inertia of the gun and pushed the aiming point upwards. The disadvantage was that the weapon consumed exorbitant amounts of ammunition and quickly overheated its barrel, making sustained fire problematic. Thus, while individual bursts left the weapon as highly concentrated fire at 1,200 rounds per minute, the Handbook of the German Army (1940) forbade the firing of more than 250 rounds in a single burst and indicated a sustained rate of no more than 300-350 rounds per minute to minimize barrel wear and overheating, although the excellent quick-change barrel design helped a great deal. Burst limits are typical on non-water-cooled automatic weapons, and slower-firing Allied guns such as the M1919 also had limits; they fired at a slower rate, but lacked a quick-change barrel, and so the operator had to limit his fire to a few hundred rounds per minute to allow the barrel to cool between bursts. Due to the slower firing rate, this led to a longer period of time spent shooting, but a roughly equivalent total number of rounds fired. Operationally, the MG 42's main drawback was that it could consume ammunition at such a high rate that it was very difficult to keep firing during offensive actions, because ammunition had to be carried forward on a continuous basis. This was also a problem at the end of the war with inexperienced German troops. Good fire discipline was necessary, and the level of training that the German infantry was receiving at that time was poor.

The method of barrel change made the MG 42 unsuitable for secondary or co-axial armament on World War II era German tanks with the exception of the Jagdpanzer IV. Early versions of the Jagdpanzer IV carried two standard (no modification made) MG 42s on both sides of the gun mantlet/glacis, firing through a ball slot which was protected by an armored cover (with the MG 42 retracted) when not in use. Later version Jagdpanzer IVs carried only one MG 42 on the left side.

In the German heavy machine gun (HMG) platoons, each platoon served four MG 34/MG 42 machine guns, used in the sustained fire mode mounted on tripods. In 1944 this was altered to six machine guns in three sections with two seven-man heavy machine gun squads per section as follows:

Squad leader (NCO) MP40

Machine gunner (private) MG 34/MG 42 and pistol

Assistant gunner (private) pistol

Three riflemen (privates) rifles

Horse leader for horse, cart and trailer (private) rifle

The MG-42 incorporated lessons hard-won on the Eastern Front. Both the cocking handle and the catch for the top cover to the working parts were designed so that the gunner could operate them wearing mitts or with a stick or rod. This was vital for winter conditions where contact by bare flesh on cold metal could cause severe injury, such as instant frostbite.

The MG42's effect was so devastating that Allied troops were trained before the D Day landings to distinguish its unique sound when fired, which was like cloth being ripped or the sound of a buzzsaw. Allied troops were trained to charge an MG-42-equipped pill box only at the time of its one weakness, which was when its overheating barrel needed to be changed.

  • This product is not available for shipping in US state(s): New Jersey, and Washington

    This product is not available for international shipping.
  • Not eligible for payment with Paypal or Amazon

Cash For Collectibles