Item Description
Original Item: Only One Available. This is a very nice all original example Model 1942 German WWII helmet shell with a single Luftwaffe Eagle decal, complete liner and original chinstrap. This stamped sheet steel construction helmet retains about 90% of the original lightly textured Luftwaffe Blue-Gray paint, and shows overall honest wear from service, and years in storage. The decal is decently retained at probably 70%.
The reverse, interior, neck guard apron is serial number stamped 2541 and the interior, left side, apron has the stamped manufacturer's code and size, ET64 indicating that it was manufactured by Eisenhuttenwerk AG of Thale, located in the Harz district in Saxony, Germany. Size 64 is a nice smaller size that can accommodate liners from 56cm to 57cm or US 7 to 7 1/8. Size 64 shells are harder to find and are therefore more valuable to a collector.
All three liner retaining pins are intact, with almost all of the original paint intact. The interior of the helmet still has the original M31 leather liner, with all 8 fingers still intact, secured at the ends by an original top tie string. The leather is mostly soft and supple, with light wear around the rim. The liner is named to the soldier that the helmet was issued to, with the name “Y. Still” written in ink within the front of the liner.
The chin strap is present and fully intact. It does show wear, and the leather is a bit stiff and dried out, with a repair in two areas where the chinstrap has been broken and sewn together. The chinstrap appears to have the end tab shortened, which was not uncommon during the war( as done by the soldier whom the helmet was issued), therefore the markings are missing.
Overall this is a nice condition genuine complete M42 Single Decal Luftwaffe helmet with some great markings! This is an item that will only continue to appreciate in value over time.
The Stalhlhelm:
The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.
These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.
In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.
The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.
The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.
The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.
- This product is available for international shipping. Shipping not available to: Australia, France, or Germany
- Due to legal restrictions this item cannot be shipped to Australia, France or Germany. This is not a comprehensive list and other countries may be added in the future.
- Not eligible for payment with Paypal or Amazon