Item:
ONSV21MAX146

Original German WWII M42 Army Heer No Decal "Battlefield Pickup" Helmet - size 64 Shell

Item Description

Original Item: Only One Available. This is a very nice "Battlefield Pickup" example of a German Model 42 Steel helmet, as issued to the Wehrmacht Heer (army). This helmet looks to have been out in the elements for some time before it was recovered and brought home, which has left the interior and exterior mostly devoid of paint, instead showing an oxidized steel patina with peppering overall. This has unfortunately removed any decals that were present, and the areas where the markings would have been stamped into the shell are too peppered to make out any markings.

We did however measure the shell on the outside, which was about 65.5cm, so this is a 64 cm shell, a nice medium large size that can accommodate liners from 56cm to 57cm or US 7 to 7 1/8 . Size 64 shells are much harder to find and are therefore more valuable to a collector.

All three liner retaining pins are intact, with the paint on the end almost completely worn away. There is still a relic condition original M-31 liner on the interior, which has the leather in dark weathered condition. It has some splits and is very stiff, with some parts ready to let go at as moment's notice. The side of the galvanized steel liner band is marked 64 n.A. / 56, indicating that this is a size 56 liner for a size 64 shell. The right side displays the full manufacture information, as well as a date:

B. & C.
LITZMANNSTADT
1943

This liner was made by Biedermann & Czarnikow, a German company who moved operations to Łódź in occupied Poland to take advantage of the slave labor in the ghetto located there. NSDAP authorities renamed Łódź to Litzmannstadt in honor of the German General Karl Litzmann who had captured the city in the previous World War.

There is no chinstrap attached to the liner.

Overall a very nice "Battlefield Pickup" German WWII M42 helmet, with a fantastic patina. This is an item that will only continue to appreciate in value over time.

The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.

The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.

  • This product is available for international shipping. Shipping not available to: Australia, France, or Germany
  • Not eligible for payment with Paypal or Amazon

YOU MAY ALSO LIKE

Cash For Collectibles