Item Description
Original Item: Only One Available. This is a very nice all original lightly service worn example of a Model 1940 German WWII helmet with a single Luftwaffe Eagle decal. This stamped sheet steel construction helmet retains about 85% of the original lightly textured Luftwaffe Blue-Gray paint, showing wear throughout, but no large areas of paint loss. There are some chips, scrapes, and so forth, but nothing out of line with regular service wear. The decal is retained about the same amount, with a bit missing due to wear. If you were looking for a nice Luftwaffe lightly worn helmet for your collection, this is it!
The reverse, interior, neck guard apron is heat lot number stamped 1254 and the interior, left side, apron has the stamped manufacturer's code and size, ET66 indicating that it was manufactured by Eisenhuttenwerk AG of Thale, located in the Harz district in Saxony, Germany. Size 66 is a nice larger size that can accommodate liners from 58cm to 59cm or US 7 1/4 to 7 5/8. Size 66 shells are harder to find and are therefore more valuable to a collector.
All three liner retaining pins are intact, with most of their original paint still present. The helmet still has its correct very good condition M31 liner with all of the 8 fingers present and supple. The liner also still has its original size adjustment string, and overall the leather shows moderate wear, and a lovely aged color. It also has been personalized with O. Gefr. Becker., though we do not know if this is period. Obergefreiter is an enlisted rank equivalent to a Corporal in the U.S. Army.
There is a size 59 stamped on one of the fingers, and the outer side of the galvanized steel liner band over the left ear is marked 66 n.A / 59, indicating that this is a size 59 liner for a size 66 shell. The right side displays the full manufacture information, as well as a date, though they are a bit faint:
SCHUBERTH-WERKE K.-G.
D. R. P.
1940
BRAUNSCHWEIG
The original chinstrap is still present, though it is a bit delicate, and has been previously stitch repaired long ago.
Overall a very nice condition genuine M40 Single Decal Luftwaffe helmet! This is an item that will only continue to appreciate in value over time.
The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.
These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.
In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.
The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.
The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.
The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.
- This product is available for international shipping. Shipping not available to: Australia, France, or Germany
- Due to legal restrictions this item cannot be shipped to Australia, France or Germany. This is not a comprehensive list and other countries may be added in the future.
- Not eligible for payment with Paypal or Amazon