Item:
ONSV10842

Original German Made M1891 Argentine Mauser Rifle by Loewe of Berlin with Aluminum Grip Bayonet - made in 1897

Item Description

Original Item: Only one available.  his is a very nice example of the Model 1891 Argentine Mauser rifle, one of many "export" models made for foreign governments, all based on the Mauser Model 1889. After the Mauser brothers finished work on the Model 71/84 for Germany in 1880, the design team set out to create a small caliber repeater that used smokeless powder. Because of setbacks brought on by Wilhelm Mauser's death, they failed to have the design completed by 1882, and the German Rifle Test Commission (Gewehr-Prüfungskommission) was formed. The commission preferred to create their own design, which was what became the Gewehr 1888, often called the "Commission Rifle".

In the meantime, Paul Mauser created two different variations of the same rifle, one with a stock strengthened with a barrel shroud and a traditional design following the layout of the 71 series, in hope he might be able to overturn the commission's decision, or at least sell his design to the Kingdom of Bavaria, which adopted its own arms. The two rifles became known as the 89 Belgian (with a barrel shroud) and the 91 Argentine (with a 71 layout) Mausers, identical in their function and feed system. The main features were the ability to use stripper clips to feed the magazine (a revolution in rate of fire), and its rimless cartridge (7.65 Argentine Mauser), advanced for the time.

The Mauser Company then set about trying to sell this new design. Unfortunately they failed to convince the Commission to reverse its decision, and the attempt to win over Bavaria did not succeed either. However, Mauser already had supplied arms to numerous countries, and when they were looking to update their rifles, they came back to Mauser. At the time, Belgium was looking to bolster its domestic arms industry, and felt that manufacturing a Mauser Design would really help them in this goal. This resulted in the founding of Fabrique Nationale d'Armes de Guerre, owned in part by Ludwig Loewe, to manufacture the Model 1889 Belgian Mauser. This company would go on to become a major arms manufacturer, which exists today as FN Herstal.

At the same time, the Ottoman Empire had a contract for Model 1877 Turkish Mausers, which were based on the model 1871. The contract however had an "escape clause" that allowed them to change the contract in the event of a more advanced Mauser system being developed. This resulted in a new contract for the Model 1890 Turkish Mauser. While this was taking place, the Argentine Small Arms Commission contacted Mauser in 1886 to replace their own Model 71s. Since they wished to keep retraining of their armed forces to a minimum, they went for the Mauser 91, as the operating principles were identical. As with other early Mausers, most such arms were made by the Ludwig Loewe company, who in 1896 joined with other manufactures to form Deutsche Waffen und Munitionsfabriken.

One of the principal defining features of the Belgian/Turkish/Argentine Mauser was its thin sheet steel jacket surrounding the barrel—a rather unusual element not common to any other Mauser mark of note. The jacket was instituted as a feature intended to maintain the effectiveness of the barrel and the solid wooden body over time, otherwise lengthening its service life and long-term accuracy when exposed to excessive firing and battlefield abuse. In spite of this approach, the jacketed barrel proved susceptible to moisture build-up and, therefore, introduced the problem of rust forming on the barrel itself–unbeknown to the user. In addition, the jacket was not perforated in any such way as to relieve the barrel of any heat build-up and consequently proved prone to denting. As such, barrel quality was affected over time regardless of the protective measure. Furthermore, another design flaw of the jacket was its extra steel content. Not only was it expensive but it was also needed in huge quantities to provide for tens of thousands of soldiers. By many accounts, the barrel jacket was not appreciated by its operators who depended on a perfect rifle in conflict. Another defining characteristic, unlike most Mausers, was a spring-loaded cock on closing bolt action resembling that of the British Lee-Metford, which predates the Mauser 1889 by five years. This development allowed for faster firing and was well received.

This example, like all of the Argentine Mausers made during and before 1897, was made by the renowned Company LUDWIG LOEWE of BERLIN, which from 1887 onward was actually part owner of Mauser Waffenfabrik. It has all matching serial numbers, with P 8481 on the barrel, receiver, wooden stock, bolt magazine floor plate, and even on the original steel-tipped cleaning rod. The serial numbers were issued sequentially with a single letter prefix. The Ludwig Loewe serial number records for the Argentine contract indicate that serial numbers N0000 to P0500 were produced in 1896, so this rifle was made probably made in the first quarter of 1897. There were also surplus receivers made, which were then used later. In 1896 Ludwig Loewe founded Deutsche Waffen- und Munitionsfabriken, the famous D.W.M., and all rifle receivers made 1897 onward were marked as such, so this rifle is definitely from early 1897, even if it was delivered for a later contract.

The left side of the receiver is marked with the production information:

MAUSER MODELO ARGENTINO 1891.
MANUFACTURA LOEWE BERLIN.

The area of the receiver over the chamber has been ground down to remove Argentine crest, as standard when sold out of service. The rest of the finish is a nice shiny blue, with light wear, and just a few areas of rust peppering around the trigger guard. The bolt, originally bright, still is mostly shiny, though there is some staining, and the bolt handle definitely shows some rust peppering. The stock is in good condition, though the toe of the butt stock has been replaced, probably as a result of being dropped, which could cause that area to crack off if it hard enough. The bore has partly bright finish with clear lands and grooves, with some past light oxidation overall.

The rifle comes with a very nice Argentine Contract Mauser M-1891 Bayonet constructed with Aluminum grip panels. The aluminum grip scales were part of an effort to lighten the bayonet. The grip metal is an alloy of aluminum, with 6 percent copper. It is in very good condition, though there is some staining on the blade, and the hilt, not protected by the scabbard, has oxidation on the steel components.

The bayonet and scabbard are marked with RA on both, for República Argentina. The almost 16" blade is in very good condition, with the only draw back being that the "Argentine Crest" on the ricasso has been ground off, as required by the Argentine military upon release from military stores. This also removed the model number as well.

The other side of the ricasso bears the German Bayonet maker's name:

WEYERSBERG
KIRSCHBAUM & CO
SOLINGEN

This company is a famous manufacturer of military swords and cutlery in Solingen, Germany - a city famous since the middle ages for its metal-working and craftsmanship in sword making. Per J. Anthony Carter's fine work GERMAN SWORD AND KNIFE MAKERS, the traditional manufacturing of swords at WKC dates back to the year 1774 when the Weyersberg first registered the ''Kings head'' as their trademark. Later in 1883 the company merged with the Kirschbaums and the company WKC was formed as it exists today. It was heavily involved with exporting edged weapons to South American countries in the late 19th and early 20th century.

Another Military Contract from the Victorian era that Mauser managed to snag from all its European competitors, complete with the correct bayonet!. In lovely condition and ready to display!

Specifications (Rifle):-
Year of Manufacture: 1897
Caliber: 7.65×53mm Mauser
Cartridge Type: Centerfire Cartridge
Barrel Length: 29 Inches

Overall Length: 48.5 Inches
Action type: Bolt-Action
Feed System: 5 round box magazine

Specifications (Bayonet):-
Blade Length: 15 3/4"
Blade Style: Single Edged bayonet
Overall length: 20 1/2“
Crossguard: 4”
Scabbard Length: 16 1/2"

  • This product is not available for shipping in US state(s): New Jersey

    This product is not available for international shipping.
  • Not eligible for payment with Paypal or Amazon

YOU MAY ALSO LIKE

Cash For Collectibles