Item:
ONSV24MDS075

Original German Early WWII SA Dagger by Gebrüder Heller of Marienthal with Scabbard and 3-Piece Hanger - Vertical Name

Item Description

Original Item: Only One Available. This is a great early pattern SA Dagger, made by the somewhat rare maker Gebrüder Heller GmbH, Stahlwarenfabrik, located in Marienthal, Germany. We have only had a few examples of edged weapons of any type by this maker. It comes comes complete with an original scabbard, which is in very good shape, and is the correct early type. This is in turn fitted with a very rare 3 piece hanger, which is in great shape. This is the full setup!

The dagger has solid nickel silver fittings throughout, and is a really nice example. The cross guards and tang nut are in very good condition throughout with all fittings having a nice lightly aged patina. The lower reverse guard is Gruppe/Gau marked Th, for Thüringen (Thuringia), a district in central Germany, with the principal cities being Weimar and Erfurt. This feature was only seen on daggers produced 1935 and prior. The nickel alloy end nut shows only a bit of turning, and the hilt is solid on the tang.

The grip is a fine product having a lovely cherry red mahogany brown brown color, with a medium center ridge construction. It looks to have been oiled or lacquered over the years, which has made it a bit darker than we usually see, but also really makes the grain "pop". There are some minor pressure dents, but no cracks or chips we can see, and the grip fits the crossguards nicely, with no wobble we can feel. The SA symbol button is nicely set, and still has most of the translucent enamel intact. There is a bit of oxidation surrounding the emblem due to contact with the wood. The grip eagle is a fine example being the style with beak that points straight. Most of the details are still there to the eagle to include the beak, breast feathering, wing feathering, talons, wreath and mobile swas. There is a bit of wear as well as more verdigris oxidation, showing that is the correct solid nickel silver for an early pattern eagle.

The blade of this example is in excellent condition, with the factory final grind cross grain retained throughout the blade! This texture is iconic, and is the definitive identifying characteristic for a real WWII German Blade. There is the usual wear from the scabbard runners, present on just about every German dagger out there, but otherwise only minor evidence of cleaning. It does look like a bit of oxidation developed on the upper front edge, and someone unfortunately used a knife sharpener to remove it. The other three edges are however look to be untouched. The acid-etched Alles für Deutschland (Everything for Germany) SA motto is crisp, still retaining almost all of the factory darkening. Heller looks to have used some type of paint to enhance their mottos, as there is some that looks to have flaked away, which we have seen on both other Heller SA daggers that we have handled.

This fine example was produced by the somewhat rare maker Gebrüder Heller GmbH, Stahlwarenfabrik (Steelware Factory), and is marked with their simplified "Vertical Name" trademark logo on the rear ricasso:

GEBR. HELLER

This company was located in Marienthal bei Schweina in Thüringen, Germany, and was founded in the early 20th century, though the shops origins trace back to the late 19th century. They manufactured edged weapons for Germany during WWI and WWII, and had a satellite drill bit company in Schmalkalden. They manufactured some SA and NSKK daggers with the "Vertical Name" as seen on this example. For more information, please see J. Anthony Carter's fine work GERMAN SWORD AND KNIFE MAKERS.

The scabbard shell is straight throughout and is the early-war style, which were produced with a brown "anodized" finish on the steel, which was then lacquered. This example has lost over 75% of the original lacquer, with some retained near the throat on the front, with more on the back. However, it still retains most of the anodized finish on both sides, with no dents or major damage we can see. There are just a few tiny areas of oxidation. The upper and lower fittings are solid nickel silver, with a great look and some dents and scratches showing typical wear. The chape is a bit dented at the end, as the nickel alloy is somewhat soft, making this a common thing to see. The throat nicely matches the crossguards, and all four of the original dome head screws are present.

The attached three piece belt hanger is in good condition, with light wear to the leather and hardware. The nickel spring clip itself is marked with a "barred A" followed by D.R.G.M. (Deutsches Reiches Gebrauchs Musterschutz) - meaning it is a protected patented design under the Reich Government. This design was registered to the owner of the "Barred A" trademark, F. W. Assmann & Söhne of Lüdenscheid, a large maker of belts, buttons, and other accoutrements. The belt loop and securing strap are a bit later design, and feature aluminum and plated steel hardware.

A great early war SA dagger from desirable maker, complete with a lovely original scabbard and rare 3 piece hanger! Ready to display!

Specifications:
Blade Length: 8 3/4"
Overall length: 13 3/4”
Crossguard: 3”
Scabbard Length: 10”

History of the SA-
The SA or Brown Shirts, were a private political formation which Adolf AH and the NSDAP used to maintain order at organized Party meetings and demonstrations. The group was formed in 1921, and grew to a huge force of nearly 3,000,000 men by the later 1930's. To instill esprit de corps, as well as create employment for the Blade City of Solingen, it was decided each SA man would carry a dagger with his Brown Shirt uniform. Huge quantities needed to be produced to accommodate the demand. The dagger initially was produced of hand-fitted nickel mounts with attractive finished wood grip and brown anodized (a bluing process) finished scabbard.

The blade was etched with the SA motto, Alles für Deutschland. Examples produced prior to 1935 were stamped with the German sector of the SA group on reverse lower crossguard. Later examples underwent standardization through the RZM ministry. These pieces were produced of cheaper plated zinc-base fittings and scabbards were simply painted brown.

Prior to his "unmasking" as a traitor, Ernst Röhm was the leader of the SA. In 1934, he distributed approximately 100,000 SA daggers with his personal inscription on the reverse blade. These daggers were to honor individuals who had served with the SA prior to December, 1931. Other than the inscription, these pieces were identical to the standard M1933 SA dagger. After the Röhm purge, the inscription was ordered to be removed. Many examples were returned to the factory for grinding. Others were simply ground in the field by whatever means were available. Examples will occasionally be encountered with remnants of the original inscription remaining on the blade, but mostly none will remain. Some blades exist with an intact inscription, reflecting only the removal of the Röhm signature. Very very rarely is an example seen with a full, untouched inscription, as the holder would have surely risked a charge of treason.

  • This product is available for international shipping. Shipping not available to: Australia, France, or Germany
  • Not eligible for payment with Paypal or Amazon

YOU MAY ALSO LIKE

Cash For Collectibles