In stock

Original Danish M1867/96 Remington Rolling Block Infantry Rifle dated 1885 with Saber Bayonet - Serial 69182

Regular price $1,295.00

Item Description

Original Item: Only One Available. The Danes elected to license the Remington design for manufacture in Denmark at the Copenhagen arsenal, which they did in a fairly large quantity. The Danish model first utilized a rimfire cartridge and that stayed in service well into the smokeless era. However, with the adoption of the 8mm M1889 Krag-Jorgensen the need to update or abandon the Remington became acute. In 1896 they were withdrawn from infantry service, converted to centerfire cartridge and issued to coast and fortress artillerymen. At that time a new much longer rear ladder sight was also fitted to the rifles.

After World War II a large quantity were sold surplus back to the US where these type first entered civilian hands, being misleadingly sold in large quantity as .45-70 Rolling blocks!

This lovely rifle features a 3.25" long back sight leaf, and comes complete with the correct saber bayonet. Left receiver flat is stamped with a Crown over the Royal Cypher over the mark M-1867. The right receiver wall is bare and the upper tang is marked KJØBENHAVNS TOIHUUS 1885 (Copenhagen Arsenal) with serial number 69182 on the barrel and on the underside of the butt stock. The rifle bears the Danish Crown on the barrel, barrel bands, rear and front stock, and other components. There is also a rear stock disk, which is marked 3AB / 2249, for the 3rd Artillery Battalion, 2249th weapon.

Condition of the rifle is very good, showing a nice patina of age typical of a rifle that was in service for a significant time. The bluing on the barrel is worn overall to a nice plum patina, and there is now some oxidation speckling in its place, which we did not clean to avoid disturbing the patina. The receiver, original bright steel, now shows light staining and oxidation. The wood does have  scratches, chips, and dents as shown, but still presents very nicely. It does not look to have been arsenal reconditioned at any time, and is still proud over most of the metalwork.

The action cycles, with a functional extractor, and the mainspring is strong. The block opens correctly, however the ejector on the left side is missing. The bore is excellent, with a bright finish and very crisp lands and grooves, showing just a tiny bit of wear. This rifle was used very little, if at all. Both sling swivels are still present, as is the original cleaning rod. Of note is that the nose cap, barrel bands, and sling swivels have been nickel plated, which is not typical.

The included Yataghan-style saber bayonet, like many of the bayonets for this rifle, this example was contract made in Germany. The ricasso of the blade is marked GEBR. WEYERSBERG / SOLINGEN, the logo of Gebrüder Weyersberg, Waffenfabrik, which from 1859 onward operated a factory on Hochstrasse in the Ohligs area of the City of Solingen. Called "The City of Blades", Solingen is a world-renowned edged weapon area, with a history dating back to the middle ages. The bayonet is in good condition, showing an overall dark oxidized patina, and the leather grips are in good shape. It still locks correctly onto the rifle.

A fine rifle worthy of any Remington or Scandinavian collection, complete with an originla bayonet! Really a lovely example here!

Specifications (Rifle):-

Year of Manufacture: 1885 - Converted Later
Caliber: 11x41.5mmRF or 11.7x51R
Cartridge Type: Rimfire Cartridge or Centerfire
Barrel Length: 35 Inches
Overall Length: 50.5 Inches
Action type: Rolling Breechblock External Hammer
Feed System: Single Shot

Specifications (Bayonet):-
Blade length: 21 1/2”
Blade Style: Single Edged "Yataghan" with Fuller
Overall length: 26 1/2”
Crossguard: 4”

Centerfire converted rifles chamber a cartridge near to the US Govt. .45-70, the 11.7x51R, a bit shorter and a bit larger. A .45-70 will function but will expand at the base and may overcrimp at the neck, not safe conditions. The rimfire cartridge was somewhat shorter but usable in the converted rifles. In fact, after conversion, the rifle could fire either rimfire or centerfire ammunition.

The Danish model first utilized a rimfire cartridge which stayed in service well into the smokeless era. This created a potential compatibility problem, rimfire cartridges won't fire in a central fire rifle, and center-fire cartridges won't operate in a rimfire rifle. However, if you look carefully, you will see that the breech block of the Danish Remington Rolling Block has two firing pin holes, one for center fire and one at the bottom of the breech block face for rimfire. The firing pin is fairly easily reversible, for use of the rifle with whatever (rimfire or central fire) ammunition is available.

The first 30,000 Danish Rolling Blocks were Danish built on Remington made actions. Thereafter they were constructed under license in Copenhagen, Denmark, as this one was.

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.

  • This product is not available for shipping in US state(s): New Jersey

    This product is available for international shipping.
  • Not eligible for payment with Paypal or Amazon


Cash For Collectibles