Item:
ONSV22MAX152

Original British WWII Early 3rd Pattern Fairbairn-Sykes Fighting Knife with Scabbard- William Rogers, Sheffield

Item Description

Original Item: Only One Available. This is a very good example of an early "Third Pattern" British Fairbairn-Sykes commando dagger, with a blacked brass handle and original scabbard. As brass was a "strategic material," only the early examples of the third pattern have brass handles, with later war produced models having blacked alloy handles. The handle dates production to late 1943 - early 1944. The knives varied somewhat in size, and this example measures 11 5/8", with a 7 inch blade. It example comes with the standard belt scabbard, with broken elastic at the top, which is definitely WWII production, and well broken in.

The condition of the knife is very good, still with relatively sharp edges, and most of the original black finish on the blade. The plain blued steel cross guard is tight on the blade with no wobble, and still has most of the original finish. It is marked with an inspector stamp, a “B” with a crown over it, along with the maker’s mark “William / Rogers / Sheffield / England” which indicates that this was a private purchase example from WWII .The handle is overall very good with lots of original original black finish in the recesses of the grip.

The original scabbard is in good condition, with the expected wear from being used in service. The leather is well broken in and soft, with some creasing and a few small tears. The brass chape is still present, but has some denting at the bottom. It still has the original elastic strap at the top. however it tore through long ago. The sew tabs along the scabbard show some wear and damage to one side, which does not detract from the overall displayability of the knife itself.

An increasingly hard to find knife that would fit into any British WWII collection.

Dimensions:
Blade length: 7”
Blade Style: Spear Point Knife
Overall length: 11 5/8”
Crossguard: 2”
Scabbard length: 7 5/8" with belt loop

History of the Fairbairn-Sykes British commando dagger:
The demand for a good fighting knife was so very urgent that a meeting was arranged in November 1940 between W. E. Fairbairn, E. A. Sykes and Jack Wilkinson Latham at Wilkinson Sword Company. Fairbairn and Sykes described the type of knife they envisioned and the purpose for which it was intended. As discussion continued, preliminary sketches were drawn up and modified time and time again.

As Robert Wilkinson Latham tells it:
'In order to explain exactly their point, the two men rose to their feet and one, it was Fairbairn my grandfather mentioned, grabbed the wood ruler from his desk and the two men danced around the office in mock combat'.

The very first 1st Pattern F-S Fighting Knives were made in November 1940. In January 1941the full war full production started, according to Robert Wilkinson Latham. The grip was made from solid brass and cut by 16 lines per inch in a diamond pattern. The grip and hand guard were nickel plated. The hand guard was curved to S-shape. The blade was grounded by hand. For this reason it is difficult to find two blades of exactly the same size and shape. This model was produced in very limited numbers.

The very first 1st Pattern Wilkinson Sword F-S knives were ordered the 14th of November 1940. Order 294 mentions 500 'RBD and Commercial knives' but possibly less. They were called in this way in the order to disguise the actual type of knife. The 1st Pattern was delivered from November 1940 until April 1941. 17th of December 1940 5000 "hunting knives" were ordered. This order concerned the first 1st Pattern knives. Price for each was 13 s 6d. All together 6,779 - 1st pattern were made.

However, as wartime demand increased, it was necessary to simplify and speed up production. Furthermore strategically important materials like brass were now in short supply. This meant that crucial changes were made to the knife design, resulting in the "Second Pattern" commando dagger, produced from August 1941 until October 1943.
While the handle design remained the same, it was cast with a hollow core meaning that it could be made using less brass. The s-shaped guard was replaced by a simpler flat design and the flat ricasso was removed from the base of the blade, enabling a more straight forward grind which could be done by machine. The scabbard’s press-stud was replaced by an elastic retaining strap. It is important to note that as there was no official specification to cover the knife, many subtle variations from the period can be seen. In September 1942, the bright finish was replaced by the now more familiar blacked knife. The scabbard chape was also blacked to help prevent the metal from reflecting light.

In October 1943, to further expedite production, further changes to the design were made, which resulted in the "Third Pattern", which is in production to this day. The dagger was being made at a number of different companies, many based in the Sheffield area, and these changes were mainly motivated from their end, not the field end. Most manufacturers now favored a fully machine ground blade, such that the central grinding line ran the complete length of the blade. The checkered knurled handle was replaced by one with 27 concentric rings to aid grip, thought to be the idea of Joseph Rodgers of Sheffield. The brass handle material was then replaced with a non-strategic alloy as production continued. The new handle was easier to cast and would have been requiring of little or no remedial work.

  • This product is available for international shipping.
  • Eligible for all payments - Visa, Mastercard, Discover, AMEX, Paypal & Sezzle

YOU MAY ALSO LIKE

Cash For Collectibles