{"product_id":"original-u-s-wwii-m1-front-seam-swivel-bale-helmet-with-replicated-paratrooper-markings-modified-chinstrap-and-modified-liner","title":"Original U.S. WWII M1 Front Seam Swivel Bale Helmet with Replicated Paratrooper Markings, Modified Chinstrap, and Modified Liner","description":"\u003cp\u003eOriginal Item. Only One Available. This is an original U.S. WWII front seam, swivel bale M1 helmet shell configured for display with replicated 101st Airborne Division markings, a modified or reproduction M1-C style chinstrap, and a standard liner that has been altered into a paratrooper configuration. The helmet bears white tactical squares associated with the 101st Signal Company and 801st Ordnance Company, together with a horizontal rear recognition bar, but the placement of the tick marks prevents a definite unit attribution.\u003c\/p\u003e\n\u003cp\u003eThe steel shell has a front seam rim and swivel chinstrap bales, a combination consistent with WWII production. A very faint heat lot stamp is visible beneath the paint. The only legible character is \u003cb\u003e6\u003c\/b\u003e. The incomplete heat lot does not provide enough information to determine whether the shell was manufactured by McCord Radiator and Manufacturing Company or Schlueter Manufacturing Company.\u003c\/p\u003e\n\u003cp\u003eThe shell has been repainted and artificially aged. The markings are later reproductions and should not be interpreted as original WWII paint.\u003c\/p\u003e\n\u003cp\u003eEach side bears a white tactical square with an external tick mark. Similar square insignia were used by support units of the 101st Airborne Division, with the position of the tick distinguishing one organization from another.\u003c\/p\u003e\n\u003cp\u003eThe replicated markings appear intended to represent either the 101st Signal Company or the 801st Ordnance Company. A tick has been painted on both the left and right markings so that the two sides appear visually parallel. Because the orientation of the tick was part of the wartime identification system, this arrangement prevents either unit from being identified conclusively.\u003c\/p\u003e\n\u003cp\u003eA replicated horizontal white bar is painted on the rear of the helmet. These rear recognition bars are commonly described by collectors as “follow me” bars and were intended to make leaders or designated personnel easier to recognize from behind.\u003c\/p\u003e\n\u003cp\u003eThe shell is fitted with an M1-C style chinstrap arrangement. The brass buckle is unusually constructed and does not appear consistent with standard wartime manufacture. The chinstrap assembly is most likely a complete reproduction that has been deliberately aged. It may also incorporate modified components, but its precise construction history cannot be confirmed.\u003c\/p\u003e\n\u003cp\u003eThe included liner appears to have begun as a standard M1 helmet liner and was later modified by adding side snaps for an M1-C style paratrooper chinstrap arrangement.\u003c\/p\u003e\n\u003cp\u003eNo manufacturer’s mold mark is clearly visible inside the liner. The crown bears the lot number 5. This lot number may be associated with International Molded Plastics production, as that company’s molded markings can sometimes be faint. The number alone is not sufficient to confirm the manufacturer.\u003c\/p\u003e\n\u003cp\u003eThe liner suspension is made from dark green webbing consistent with Korean War era replacement or refurbishment. It is not the earlier olive drab shade generally expected in an unaltered WWII liner. The paratrooper yokes and chin cup appear to be aged reproductions along with the snaps for the M1C chinstrap. The liner chinstrap also appears to be an aged reproduction.\u003c\/p\u003e\n\u003cp\u003eThe shell remains an original WWII front seam, swivel bale M1 component, but its present airborne appearance results from later collector repainting and modification. The faint heat lot, altered chinstrap, modified liner, dark green suspension, reproduced yokes, and mirrored tactical ticks are all important interpretive and condition factors.\u003c\/p\u003e\n\u003cp\u003eThe helmet remains suitable as a display representation of a 101st Airborne support unit helmet, while its replicated markings and reconstructed paratrooper fittings are clearly distinguishable from its original WWII shell.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":45473101480005,"sku":"ONSV26CBZ082","price":450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/ONSV26CBZ082__01.jpg?v=1785870529","url":"https:\/\/www.ima-usa.com\/products\/original-u-s-wwii-m1-front-seam-swivel-bale-helmet-with-replicated-paratrooper-markings-modified-chinstrap-and-modified-liner","provider":"International Military Antiques","version":"1.0","type":"link"}