{"product_id":"original-u-s-wwii-1942-dated-m49a2-60mm-deactivated-mortar-round-with-fuse-inert","title":"Original U.S. WWII 1942-Dated M49A2 60mm Deactivated Mortar Round with Fuse - Inert","description":"\u003cp\u003eOriginal Item: Only One Available. This is a scarce original U.S. WWII \u003cstrong\u003e60mm High Explosive M49A2 mortar round\u003c\/strong\u003e, manufactured in\u003cstrong\u003e 1942\u003c\/strong\u003e for use with the standard U.S. \u003cstrong\u003eM2 60mm mortar.\u003c\/strong\u003e The round retains its original M52 point-detonating fuze, dated\u003cstrong\u003e September 1942\u003c\/strong\u003e, together with extensive stamped and yellow-painted ammunition markings. Although heavily service-worn and oxidized, portions of the original finish and wartime stenciling remain visible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnloaded or dummy grenades, artillery shell casings, and similar devices, which are cut or drilled in an BATF-approved manner so that they cannot be used as ammunition components for destructive devices, are not considered NFA weapons. This example is in total compliance and is NOT AVAILABLE FOR EXPORT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a hard to find WWII M49A2 Deactivated Mortar Round, for the U.S. 60mm M2 Mortar. The M49A2 was a High explosive (HE) round, equipped with a partial aluminum housed point detonating fuse \u003cstrong\u003ePDF M52.\u003c\/strong\u003e, which is dated \u003cstrong\u003eSeptember 1942\u003c\/strong\u003e. It was an explosive shell used against infantry and other light area targets. It has a minimum range of 200 yards when fired without a boosting charge at a 70° angle and a maximum range of 2017 yards when fired with four boosting charges at a 45° angle.\u003c\/p\u003e\n\u003cp\u003eThe body is stamped \u003cstrong\u003eLOT 97 231407 B.W. 1942 60MM-M49A2\u003c\/strong\u003e. It’s also painted on the side in yellow stencil:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e60M.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTNT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSHELL M49A2\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAMM. LOT K.O.P.-35\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere is some of the original paint present under the heavy wear and oxidation pitting. The fuse, which does not have the aluminum detonation button, no longer screws off due to oxidation. The bottom of the round is also stamped \u003cstrong\u003e1942\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe M49A2 was intended primarily for use against\u003cstrong\u003e enemy personnel and light materiel,\u003c\/strong\u003e producing fragmentation and blast upon impact. Period Ordnance testing gave the shell an effective fragmentation area of approximately \u003cstrong\u003e400 square yards\u003c\/strong\u003e, with an effective burst radius of about \u003cstrong\u003e11.3 yards\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe complete service round was fitted with up to \u003cstrong\u003efour removable propellant increments\u003c\/strong\u003e, allowing the mortar crew to vary range according to the firing mission. A 1942 Army technical manual lists an approximate range of \u003cstrong\u003e100 to 1,935 yards\u003c\/strong\u003e for the M49A2 when fired from the standard M2 60mm mortar.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM2 60mm mortar\u003c\/strong\u003e was adopted as the standard American light infantry mortar before WWII and served throughout the conflict with both the U.S. Army and U.S. Marine Corps. It provided infantry companies with portable indirect-fire support at ranges beyond those practical for hand grenades while remaining considerably lighter than the 81mm M1 mortar.\u003c\/p\u003e\n\u003cp\u003eThe M2 was a smoothbore, muzzle-loading weapon mounted on a bipod and baseplate. Its compact size and relatively substantial range made it one of the principal company-level fire-support weapons used by American infantry formations throughout WWII.\u003c\/p\u003e\n\u003cp\u003eThe combination of the\u003cstrong\u003e 1942-dated M49A2 body, September 1942 M52 point-detonating fuze, surviving LOT 97 \/ 231407 \/ B.W. \/ 1942 \/ 60MM-M49A2 stamping, yellow TNT and ammunition-lot stenciling, and additional 1942 base\u003c\/strong\u003e \u003cstrong\u003emarking\u003c\/strong\u003e makes this an especially informative wartime example. The missing upper fuze component, seized fuze, heavy oxidation, pitting, and finish loss are all significant condition factors, while the extensive surviving markings firmly document the round as a genuine 1942-produced U.S. 60mm H.E. mortar projectile.\u003cbr\u003e\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":46273507360837,"sku":"ONSV26WOX072","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/3FA6EAB2-864A-44AF-BA1E-F95843234252.jpg?v=1793818860","url":"https:\/\/www.ima-usa.com\/products\/original-u-s-wwii-1942-dated-m49a2-60mm-deactivated-mortar-round-with-fuse-inert","provider":"International Military Antiques","version":"1.0","type":"link"}