{"product_id":"original-u-s-colt-45cal-single-action-army-revolver-made-in-1890-with-4-barrel-and-factory-letter-matching-serial-136167","title":"Original U.S. Colt .45cal Single Action Army Revolver Made in 1890 with 4 ¾\" Barrel and Factory Letter - Matching Serial 136167","description":"\u003cp\u003eOriginal Item: Only One Available. This is every School boy's dream! A real Cowboy six gun! The Colt Single Action Army Revolver, often referred to as the SAA or M1873, was the first Colt cartridge revolver to see wide acceptance and use, having been developed to meet the needs of the U.S. Government. Dubbed the \"Peacemaker\", the design is a famous piece of Americana and the American Wild West era, due to its popularity with ranchers, lawmen, and outlaws alike. While Colt has fielded many other designs since its introduction, none have been able to capture the same type of romance, resulting in the design being reissued several times since originally being discontinued.\u003c\/p\u003e\n\u003cp\u003eThis great frontier-worn Single Action Army Revolver in .45cal has a \"gunfighter friendly\" original short 4 ¾\" barrel and lovely worn Colt hard rubber grips, bearing the iconic Colt \"Prancing Pony\" on top. Original blued from the factory, it now shows a worn oxidized patina overall. This definitely looks to be an example that saw long use on the frontier, giving it an impossible to duplicate look!\u003c\/p\u003e\n\u003cp\u003eThe revolver's serial number is \u003cstrong\u003e136167\u003c\/strong\u003e, which dates production to \u003cstrong\u003e1890\u003c\/strong\u003e. It has the serial number on the frame, trigger guard, and grip frame, making this a very nice \u003cstrong\u003e\"ALL MATCHING\"\u003c\/strong\u003e example, without any parts swapped out over the years. This revolver was made after\u003cstrong\u003e \u003c\/strong\u003e1883, when Colt stopped marking the cylinders, which they did not do again until 1912. There is also assembly number \u003cstrong\u003e295\u003c\/strong\u003e marked on the loading gate. It is in full working order and condition, with a great patinated look, sure to delight any \"Old West\" Americana collector.\u003c\/p\u003e\n\u003cp\u003eThe revolver came to us with an original Colt Factory letter from the office of the Colt Historian \u003cem\u003e\u003cstrong\u003eBeverly Jean Haynes\u003c\/strong\u003e\u003c\/em\u003e, which has her signature and correct raised seal applied in the lower left corner. The paper used is the correct Colt Letterhead and is dated \u003cem\u003e\u003cstrong\u003eJune 7, 2024\u003c\/strong\u003e\u003c\/em\u003e, indicating it is a \u003cem\u003e\u003cstrong\u003eCOLT SINGLE ACTION ARMY REVOLVER\u003c\/strong\u003e\u003c\/em\u003e, with the caliber listed as \u003cem\u003e\u003cstrong\u003e.45\/c\u003c\/strong\u003e\u003c\/em\u003e and finish listed as \u003cem\u003e\u003cstrong\u003eBlue\u003c\/strong\u003e\u003c\/em\u003e. The barrel is listed as \u003cem\u003e\u003cstrong\u003e4 ¾\"\u003c\/strong\u003e\u003c\/em\u003e, while the stocks are \u003cem\u003e\u003cstrong\u003eNot Listed\u003c\/strong\u003e\u003c\/em\u003e. The standard grip material for this time period was hard rubber, so this revolver is still completely in the original configuration as shipped from Colt. The gun was shipped on \u003cem\u003e\u003cstrong\u003eNovember 15, 1890\u003c\/strong\u003e\u003c\/em\u003e as part of a shipment of 50 similar guns to \u003cem\u003e\u003cstrong\u003eE.C. Meacham Arms Company\u003c\/strong\u003e\u003c\/em\u003e in St. Louis, Missouri. This company operated from 1871-circa 1915, and initially sold inexpensive imported firearms and later transitioned to higher quality American firearms.\u003c\/p\u003e\n\u003cp\u003eThe original double line address marking on the top of the barrel, correct for this length of barrel, is still mostly clear:\u003c\/p\u003e\n\u003ccenter\u003e\n\u003cp\u003e\u003cstrong\u003eCOLT'S PT. F. A. MFG. CO.\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eHARTFORD. CT. \u003c\/strong\u003e\u003cem\u003e[U. S. A.]\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/center\u003e\n\u003cp\u003eThe left side of the frame has had a lot of wear and cleaning in the past, so the Colt patent dates are only partly retained:-\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003e[PAT. SEPT. 19. 18]\u003c\/em\u003e\u003cstrong\u003e71.\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e[JULY. 2.72. JAN. 19.]\u003c\/em\u003e\u003cstrong\u003e75\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are the early 3rd pattern markings, and this was made before the \"Prancing Pony\" logo began appearing on the frame in 1891. We were not able to see any caliber markings on the trigger guard, however they would have probably been worn away. However we have checked the cylinder and barrel with real cartridges to confirm the chambering listed on the letter. This revolver is definitely chambered for .45 Colt, also known as .45 \"LONG\" Colt, one of the most legendary handgun cartridges of the old west. When you hear people talk of a \"Colt 45\", this model gun is the reason why.\u003c\/p\u003e\n\u003cp\u003eThe revolver has the great worn look that only use in service can give, showing evidence of peppering on the exterior, and possibly some past oxidation and rust. It has been heavily cleaned in areas, and looks like the rear left top of the barrel was repaired at some point. It definitely appears to have been welded at that spot, and we can see some intrusion into the barrel bore. The original Colt hard rubber grips have a fantastic \"broken-in\" look, with the original checkering and logos still clearly visible, but definitely worn, especially on the right hand side. There are some scratches and small chips, but no cracks or other major damage, and there is the usual wear around the bottom of the grips.\u003c\/p\u003e\n\u003cp\u003eMechanically, the action is smooth, with a fairly good cylinder lock up, and strong mainspring. The action has all four clicks, and cycles correctly, though there is definitely slop in the lockup, and it can overshoot if the hammer is pulled back very quickly. \u003cspan style=\"font-size: 0.875rem;\"\u003eAs with all revolvers of this age we recommend being very gentle with cycling it, so we do not recommend \"fanning\" or \"fan firing\". \u003c\/span\u003eThe bore is in very good condition, showing a mostly bright finish with clear lands and grooves, but with a past repair it should definitely NEVER be used.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePistols such as this are extremely difficult to find today at any reasonable price. This honest worn example is just ideal for any Wild West Collection. A great collector's revolver, ready to display!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYear of Manufacture: 1890\u003cbr\u003eCaliber: .45 \"Long\" Colt\u003cbr\u003eAmmunition Type: Centerfire Cartridge\u003cbr\u003eBarrel Length: 4 ¾ inches\u003cbr\u003eOverall Length: 10 ¼ inches\u003cbr\u003eAction: Single Action\u003cbr\u003eFeed System: 6 Shot Revolver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHistory of the Colt Single Single Action Army\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBound by the Rollin White patent (#12,648, April 3, 1855) and not wanting to pay a royalty fee to Smith \u0026amp; Wesson, Colt could not begin development of bored-through revolver cylinders for metallic cartridge use until April 4, 1869. For the design, Colt turned to two of its best engineers: William Mason and Charles Brinckerhoff Richards who had developed a number of revolvers and black powder conversions for the company. Their effort was designed for the United States government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and adopted as the standard military service revolver. Production began in 1873 with the Single Action Army model 1873, also referred to as the \"New Model Army Metallic Cartridge Revolving Pistol\".\u003c\/p\u003e\n\u003cp\u003eThe very first production Single Action Army, serial number 1, thought lost for many years after its production, was found in a barn in Nashua, New Hampshire in the early 1900s. It was chambered in .45 Colt, a centerfire design containing charges of up to 40 grains (2.6 g) of fine-grained black powder and a 255-grain (16.5 g) blunt roundnosed bullet. Relative to period cartridges and most later handgun rounds, it was quite powerful in its full loading.\u003c\/p\u003e\n\u003cp\u003eThe Colt Single Action Army revolver, along with the 1870 and 1875 Smith \u0026amp; Wesson Model 3 \"Schofield\" revolver, replaced the Colt 1860 Army Percussion revolver. The Colt quickly gained favor over the S\u0026amp;W and remained the primary US military sidearm until 1892 when it was replaced by the .38 Long Colt caliber Colt Model 1892, a double-action revolver with swing-out cylinder. By the end of 1874, serial no. 16,000 was reached; 12,500 Colt Single Action Army revolvers chambered for the .45 Colt cartridge had entered service and the remaining revolvers were sold in the civilian market.\u003c\/p\u003e\n\u003cp\u003eThe Colt .45 is a famous piece of American history, known as \"The Gun That Won the West\". The Single Action army is a very popular firearm, even today, and it continues to be produced in various configurations.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":42701988724805,"sku":"ONSV25TGA049","price":4295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/ONSV25TGA049__01MAIN.jpg?v=1745879002","url":"https:\/\/www.ima-usa.com\/products\/original-u-s-colt-45cal-single-action-army-revolver-made-in-1890-with-4-barrel-and-factory-letter-matching-serial-136167","provider":"International Military Antiques","version":"1.0","type":"link"}