{"product_id":"original-u-s-civil-war-colt-model-1860-army-44-caliber-four-screw-percussion-revolver-with-shoulder-stock-cuts-strong-cylinder-scene-and-excellent-bore-mostly-matching-serial-no-13760-made-in-1861","title":"Original U.S. Civil War Colt Model 1860 Army .44 Caliber Four Screw Percussion Revolver with Shoulder Stock Cuts, Strong Cylinder Scene, and Excellent Bore, Mostly Matching Serial No. 13760, Made in 1861","description":"\u003cp\u003eOriginal Item: Only One Available. This is a very attractive early production \u003cstrong\u003eColt Model 1860 Army .44 caliber percussion revolver\u003c\/strong\u003e, serial number \u003cstrong\u003e13760\u003c\/strong\u003e, manufactured in \u003cstrong\u003e1861\u003c\/strong\u003e at the beginning of the American Civil War. It is a desirable early \u003cstrong\u003efour screw frame\u003c\/strong\u003e example configured to accept a detachable shoulder stock, with the corresponding recoil shield cuts and buttplate notch. It retains its full 8\" round barrel, six shot rebated cylinder with a notably strong surviving naval battle scene, matching serial numbers on the major components, a service worn original appearance, and an especially nice bore.\u003c\/p\u003e\n\u003cp\u003eThis is an antique black powder firearm manufactured before 1899. Under federal law, it may generally be owned within the United States without a special license or permit and does not require transfer through a Federal Firearms Licensee. However, state and local laws may vary. This firearm is sold solely as a historical collector’s item and has not been test fired or inspected for firing safety by a professional gunsmith. Any mechanical or bore observations provided below describe only its present condition and should not be interpreted as confirmation that the firearm is safe to load or fire. The purchaser is solely responsible for complying with all applicable federal, state, and local laws.\u003c\/p\u003e\n\u003cp\u003eThe Colt Model 1860 Army was introduced just before the Civil War as a lighter and more refined .44 caliber successor to Colt's massive Dragoon revolvers. Using an 1851 Navy size frame enlarged and rebated to accept a .44 caliber cylinder, the Model 1860 combined considerable power with a much handier form. Approximately \u003cstrong\u003e200,000\u003c\/strong\u003e were manufactured between 1860 and 1873, and the type became one of the most important Union cavalry and officer sidearms of the Civil War.\u003c\/p\u003e\n\u003cp\u003eThis example has the standard early-war configuration with an \u003cstrong\u003e8\" round barrel\u003c\/strong\u003e, six shot rebated cylinder, brass trigger guard, iron backstrap, and one piece walnut grip. The metal surfaces retain a pleasing gray and brown service patina overall, with no obvious evidence of modern refinishing.\u003c\/p\u003e\n\u003cp\u003eThe principal serial number is:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e13760\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eand is found on the barrel, frame, trigger guard, and grip frame. The cylinder and barrel wedge are marked with the abbreviated number:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e3760\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ecorresponding to the main serial. The cylinder arbor is instead marked:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e686\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eindicating that this part is a replacement. Based on the numbered components examined, the revolver is therefore best described as \u003cstrong\u003emostly matching\u003c\/strong\u003e, with the arbor being the known mismatched component.\u003c\/p\u003e\n\u003cp\u003ePublished Colt serial tables place Model 1860 Army serial numbers approximately \u003cstrong\u003e2000 through 24999\u003c\/strong\u003e in \u003cstrong\u003e1861\u003c\/strong\u003e, confirming that serial 13760 was manufactured during that year. This places the revolver squarely within the first year of the Civil War, although no specific military issue, unit assignment, or individual wartime use is documented for this revolver.\u003c\/p\u003e\n\u003cp\u003eThis is a desirable \u003cstrong\u003efour screw frame\u003c\/strong\u003e Model 1860 Army. In addition to the normal frame screws, it has the extra pair used to support a detachable shoulder stock. The rear of the frame also has the corresponding cuts in the recoil shields, while the iron backstrap and buttplate arrangement includes the small stock attachment notch. These features identify the revolver as one of the early Model 1860s manufactured with provision for Colt's detachable shoulder stock.\u003c\/p\u003e\n\u003cp\u003eThe top of the barrel is clearly marked:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e— ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA. —\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ewhile the left side of the frame retains the familiar:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCOLTS\u003cbr\u003ePATENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003emarking. The revolver does not carry a visible \"44 CAL\" marking on the left shoulder of the trigger guard. Variations in this marking are encountered on early Model 1860 production, and its absence by itself should not be regarded as evidence of alteration.\u003c\/p\u003e\n\u003cp\u003eThe rebated cylinder is particularly appealing, retaining an estimated \u003cstrong\u003eapproximately 65% of its roll engraved naval battle scene\u003c\/strong\u003e. After the earliest fluted cylinder production, Colt adopted the rebated round cylinder with the W. L. Ormsby naval engagement scene that became standard on the Model 1860 Army. The surviving scene on this example is considerably stronger than that seen on many service used revolvers.\u003c\/p\u003e\n\u003cp\u003eThe cylinder also retains much of the marking:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCOLT'S PATENT №\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eadjacent to its abbreviated serial number. The rear face originally incorporated six small safety pins between the percussion nipples, allowing the hammer to rest between loaded chambers. On this revolver most of those pins have been worn down or damaged, a common condition on well used percussion Colts.\u003c\/p\u003e\n\u003cp\u003eSeveral small single letter inspection or assembly marks are also visible on individual components. Early Model 1860 Army revolvers are known with a variety of such inspection marks, although no readable military grip cartouches remain on this example.\u003c\/p\u003e\n\u003cp\u003eThe one piece walnut grip remains in very good service used condition and retains its original overall shape. The wood now sits slightly below the surrounding grip frame in areas, most likely the result of repeated handling, cleaning, and refinishing over its long life. We do not see any legible government inspection cartouches remaining on either side.\u003c\/p\u003e\n\u003cp\u003eThe revolver is mechanically complete and operates well during careful manual inspection. The hammer cycles correctly, the cylinder indexes accurately, and cylinder lockup is solid. The trigger release is unusually light and should be regarded as a \u003cstrong\u003every sensitive or near hair trigger\u003c\/strong\u003e condition rather than as normal factory adjustment.\u003c\/p\u003e\n\u003cp\u003eThe revolver also disassembles in the normal Colt manner. The barrel wedge can be removed and the barrel assembly separated from the frame, and the barrel-to-frame fit is presently tight and solid.\u003c\/p\u003e\n\u003cp\u003eThe bore is in \u003cstrong\u003eexcellent condition\u003c\/strong\u003e, with a bright interior and crisp, well defined lands and grooves. Colt's progressive or gain twist rifling remains readily visible. There is only minor evidence of old fouling and oxidation, concentrated mainly near the muzzle, and the bore is one of the strongest condition features of the revolver.\u003c\/p\u003e\n\u003cp\u003eAll six percussion nipples remain present and open. They show expected service wear, oxidation, and some deformation at their outer edges from repeated hammer contact. The overall condition of the cylinder face and nipples is consistent with an arm that was actually used rather than preserved unused.\u003c\/p\u003e\n\u003cp\u003eWith its early \u003cstrong\u003e1861\u003c\/strong\u003e manufacture date, desirable four screw shoulder stock frame, mostly matching serial number \u003cstrong\u003e13760\u003c\/strong\u003e, strong surviving cylinder scene, excellent bore, solid mechanics, and honest service patina, this is a particularly appealing early Civil War Colt Model 1860 Army. It would make a strong addition to a collection of Civil War sidearms, early Colt percussion revolvers, U.S. cavalry weapons, or shoulder-stock capable Model 1860 variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYear of Manufacture: 1861\u003cbr\u003e\u003cspan\u003eManufacturer: Colt’s Patent Fire Arms Manufacturing Company\u003cbr\u003eModel: 1860 Army Percussion Revolver\u003cbr\u003eSerial No.: 13760\u003c\/span\u003e\u003cbr\u003eCaliber: .44cal\u003cbr\u003eAmmunition Type: Cap and Ball\u003cbr\u003eBarrel Length: 8 inches\u003cbr\u003eOverall Length: 14 inches\u003cbr\u003eAction: Single\u003cbr\u003eFeed System: 6 Shot Revolver\u003cbr\u003e\u003cspan\u003eFederal Classification: Pre-1899 Antique\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Colt Army Model 1860\u003c\/strong\u003e is a muzzle-loaded cap \u0026amp; ball .44-caliber revolver used during the American Civil War made by Colt's Manufacturing Company. It was used as a side arm by cavalry, infantry, artillery troops, and naval forces.\u003c\/p\u003e\n\u003cp\u003eThe Colt 1860 Army uses the same size frame as the .36 caliber 1851 Navy revolver. The frame is relieved to allow the use of a rebated cylinder that enables the Army to be chambered in .44 caliber. the barrel on the 1860 Army has a forcing cone that is visibly shorter than that of the 1851 Navy, allowing the Army revolver to have a longer cylinder. Another distinguishing feature of the Colt 1860 Army, first introduced on the Colt 1855 Sidehammer Revolver, is the \"creeping\" loading lever.\u003c\/p\u003e\n\u003cp\u003eMore than 200,000 were manufactured from 1860 through 1873. Colt's biggest customer was the US Government with no less than 129,730 units being purchased and issued to the troops. The weapon was a single-action, six-shot weapon accurate up to 75 to 100 yards, where the fixed sights were typically set when manufactured. The rear sight was a notch in the hammer, only usable when the revolver was fully cocked.\u003c\/p\u003e\n\u003cp\u003eThe Colt .44-caliber \"Army\" Model was the most widely used revolver of the Civil War. It had a six-shot, rotating cylinder, and fired a 0.454-inch-diameter (11.5 mm) round spherical lead ball, or a conical-tipped bullet, typically propelled by a 30-grain charge of black powder, which was ignited by a small copper percussion cap that contained a volatile charge of fulminate of mercury (a substance that explodes upon being subjected to a sharp impact). The percussion cap, when struck by the hammer, ignited the powder charge. When fired, balls had a muzzle velocity of about 900 feet per second (274 meters\/second), although this depended on how much powder one loaded it with.\u003c\/p\u003e\n\u003cp\u003eThe unfluted cylinder was 'rebated,' meaning that the rear of the cylinder was turned to a smaller diameter than the front. The barrel was rounded and smoothed into the frame, as was the Navy Model. The frame, hammer, and rammer lever were case-hardened, the remainder blued; grips were of one-piece walnut; and the trigger guard and front grip strap were of brass while the backstrap was blued.\"\u003c\/p\u003e\n\u003cp\u003eA distinguishing feature of the Model 1860 was that its frame had no top strap, or no component running above the cylinder. Instead, its strength came from the lower frame and the massive fixed cylinder pin. This made the gun slimmer and lighter than its main competitor, the Remington Model 1858, but with a possible loss of strength. The fixed cylinder pin also meant that the barrel had to be removed in order to remove the cylinder, unlike the Model 1858, which only required you to remove the cylinder retaining pin.\u003c\/p\u003e\n\u003cp\u003eHistory\u003c\/p\u003e\n\u003cp\u003eBy April 1861, 2,230 of Colt's earliest production went to dealers south of the Mason-Dixon line. The United States Navy ordered 900 fluted cylinder revolvers in May 1861 later issued to ships enforcing the Atlantic and Gulf blockade. United States Army orders also began in May, and 127,157 had been delivered before a 5 October 1864 fire put Colt's factory out of operation for the duration of hostilities.\u003c\/p\u003e\n\u003cp\u003eOperation\u003c\/p\u003e\n\u003cp\u003eLoading is a somewhat lengthy process, with each of the six chambers drilled into the revolving cylinder being loaded from the front, or \"muzzle\" end. A measured amount of black powder is poured into a chamber. Next a lead ball is placed at the opening of the chamber and seated by firmly pressing it in with the pivoting loading lever which is attached beneath the barrel of the revolver. For sealing each chamber, an over-size 0.454-inch-diameter (11.5 mm) lead ball is trimmed slightly by the rim of the chamber as the rammer forces it inside. Cap and ball shooters also often place a lubricated wad between balls and powder, or, alternatively, pack lard or a commercially-sold bore lubricant at the mouth of each chamber in an attempt to prevent powder in an adjacent chamber from being ignited by when the gun is fired, which is known as a chainfire.\u003c\/p\u003e\n\u003cp\u003eWhen the Colt Model 1860 was used by 19th century soldiers, they most often loaded the gun using paper cartridges. These cartridges consisted of a pre-measured load of black powder and a ball, wrapped in nitrated paper (paper that had been soaked in potassium nitrate and then dried, to make it more flammable). To load each chamber, one only had to slip the cartridge into the front of the chamber and seat the ball with the loading lever ram. Then a percussion cap was placed onto the raised aperture, called a nipple, at the back end of the chamber.\u003c\/p\u003e\n\u003cp\u003eThe Colt 1860 cost approximately $20 per revolver. This was rather expensive during the 1860s, both for the United States Army and private citizens. Colt had been criticized by this high price, and by 1865 the revolver was reduced to $14.50.\u003c\/p\u003e\n\u003cp\u003eThe Colt \"Army\" revolver is to be distinguished from the Colt \"Navy\" revolver of which there were two models, the octagonal barrel Model 1851 Navy, and the round-barreled Model 1861 Navy, both Navy models being in the smaller .36-caliber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":46481737482309,"sku":"ONSV26HAR044","price":2495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/268D0EC6-46F2-49C2-8F2B-478C1C94EB56.jpg?v=1795028986","url":"https:\/\/www.ima-usa.com\/products\/original-u-s-civil-war-colt-model-1860-army-44-caliber-four-screw-percussion-revolver-with-shoulder-stock-cuts-strong-cylinder-scene-and-excellent-bore-mostly-matching-serial-no-13760-made-in-1861","provider":"International Military Antiques","version":"1.0","type":"link"}