{"product_id":"original-imperial-german-wwi-m16-stahlhelm-helmet-shell-with-panel-camouflage-paint-marked-si-68","title":"Original Imperial German WWI M16 Stahlhelm Helmet Shell with Panel Camouflage Paint - Marked SI.66","description":"\u003cp\u003eOriginal Item: Only One Available. This is a very good example of a totally original WWI German M16 Helmet shell, with a very nice \"paneled\" camouflage paint scheme. This was a very popular type of camouflage used on both sides of WWI, and this is a very attractive example, with the classic dark brown, greens, yellow, and red. There is a clear division between each color with a black border. The stamped, sheet steel construction, helmet retains much of the original camouflage paint, and is a great looking example!\u003c\/p\u003e\n\u003cp\u003eThe helmet still has both of the dome headed chinstrap retaining rivets, which hold the interior pickelhaube style chin strap lugs in place. The shell also retains both of the extended ventilation side lugs, which are the correct short version without any step for the larger size 66 shell. This would ensure proper installation of a Stirnpanzer brow plate regardless of shell size. The liner is completely missing, even the split pins. The chin strap is missing, but both of the chin strap loops still attached to the lugs.\u003c\/p\u003e\n\u003cp\u003eThe shell is stamped \u003cstrong\u003eSi.66\u003c\/strong\u003e over the left ear, indicating that it was manufactured by  \u003cem\u003eEisenhuette Silesia\u003c\/em\u003e, Paruschowitz Oberschlesien. This company made shells in sizes 62 and 66 for the war effort. Size 66 is a nice large size that can accommodate liners from 58cm to 60cm or US 7 1\/4 to 7 1\/2. Size 66 shells are always hard to find and are therefore more valuable to a collector. There is a rolling mill mark dome stamp of \u003cstrong\u003eBi 5 6 4\u003c\/strong\u003e, indicating that \u003cem\u003eBismarckhutte\u003c\/em\u003e in Oberschlesien made the steel. This is the usual dome stamp for an \"Si\" marked helmet.\u003c\/p\u003e\n\u003cp\u003eThis wonderful panel camouflage helmet shell, offered in very nice collectible condition, makes an eye catching addition to any Great War collection. Ready to display!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHistory of the M16 Helmet\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Stahlhelm was introduced into regular service during the Verdun campaign in early 1916.\u003c\/p\u003e\n\u003cp\u003eThe M1916 design had side-mounted horn-like ventilator lugs which were intended to be support for an additional steel brow plate or Stirnpanzer, which only ever saw limited use by snipers and trench raiding parties, as it was too heavy for general use.\u003c\/p\u003e\n\u003cp\u003eThe shell came in different sizes, from 60 to 68, with some size 70s reported. The suspension, or liner, consisted of a headband with three segmented leather pouches, each holding padding materials, and leather or fabric cords could be adjusted to provide a comfortable fit. The one-piece leather chinstrap was attached to the shell by M1891 chinstrap lugs, the same kind used in the Pickelhaube helmet.\u003c\/p\u003e\n\u003cp\u003eThe M1916 design provided excellent protection: Reserve Lieutenant Walter Schulze of 8th Company Reserve Infantry Regiment 76 described his combat introduction to the helmet on the Somme, 29 July 1916:\u003c\/p\u003e\n\u003cp\u003e\"... suddenly, with a great clanging thud, I was hit on the forehead and knocked flying onto the floor of the trench... a shrapnel bullet had hit my helmet with great violence, without piercing it, but sufficiently hard to dent it. If I had, as had been usual up until a few days previously, been wearing a cap, then the Regiment would have had one more man killed.\u003c\/p\u003e\n\u003cp\u003eBut the helmet was not without its flaws. The ventilator horns often let cold air in during the winter, requiring the wearer to block the vents with mud or fabric. The large, flared skirt tended to make it difficult for soldiers to hear, distorting surrounding sounds and creating an echo when the wearer spoke.\u003c\/p\u003e\n\u003cp\u003eOriginally painted Feldgrau (field grey), the Stahlhelm was often camouflaged by troops in the field using mud, foliage, cloth covers, and paint. Official issue cloth covers in white and grey appeared in late 1916 and early 1917. Camouflage paint was not formally introduced until July 1918, when German Army Order II, No 91 366, signed by General Erich Ludendorff on 7 July 1918, outlined official standards for helmet camouflage. The order stipulated that helmets should be painted in several colors, separated by a finger-wide black line. The colors should be relevant to the season, such as using green, brown and ocher in summer.\u003c\/p\u003e\n\u003cp\u003eAfter the effectiveness of the M1916 design was validated during the 1916 campaigns, incremental improvements were subsequently made.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":39667724648517,"sku":"ONSV21NSH247","price":1295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/products\/ONSV21NSH247__03.jpg?v=1639191459","url":"https:\/\/www.ima-usa.com\/products\/original-imperial-german-wwi-m16-stahlhelm-helmet-shell-with-panel-camouflage-paint-marked-si-68","provider":"International Military Antiques","version":"1.0","type":"link"}