{"product_id":"original-german-wwii-nskk-dagger-by-rare-maker-wmw-max-weyersberg-with-scabbard-and-hanger-rzm-m7-12","title":"Original German WWII NSKK Dagger by Rare Maker WMW Max Weyersberg with Scabbard and Hanger - RZM M7\/12","description":"\u003cp\u003eOriginal Item: Only One Available. This very good condition mid-late war period produced NSKK \u003cem\u003eDienstdolch\u003c\/em\u003e (Service Dagger) has nickel-plated fittings throughout, and comes complete with the original scabbard and belt hanger. This example was made by the the rare Solingen-based firm of \u003cem\u003eWMW Max Weyersberg, Waffenfabrik\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eThese daggers are identical to the SA dagger, except they have a black finished scabbard. The guards and tang nut are nickel plated alloy, probably zinc or some other \"pot metal\", and have most of the plating intact, showing overall light peppered oxidation. The pommel guard has lost the plating right where it contacts the grip due to reacting with the stain in the wood combined with moisture. The steel pommel nut has had all of the plating flake off, allowing the base metal to oxidize a bit, however we do not see any signs of turning. The hilt is overall tight on the blade.\u003c\/p\u003e\n\u003cp\u003eThe grip is a fine product having a fine mahogany tone in the surfaces and medium center ridge construction. This grip is in very good condition with great grain, and fits the crossguards well, though it does show some cracking near the lower guard, as well as a small chip near the crossguard, both on the obverse. It also looks like water or some other liquid came into contact with the grip, as we can see some lighter areas that definitely look like past water droplets. There is also the usual light pressure denting present. The SA \/ NSKK button itself is nicely set having fully intact enamel, and the plating is partly intact with verdigris and oxidation as shown. The details are still there to the inlaid aluminum eagle, including the beak, breast feathering, wing feathering, talons, wreath and mobile swas.\u003c\/p\u003e\n\u003cp\u003eThe blade of this example is in very good condition, still showing much of the factory final polish grind crossgrain. This texture is iconic, and is the definitive identifying characteristic for a real WWII German Blade. The blade has had past oxidation staining occur over much of the blade, which has made the grain a bit hard to see, but it has not been excessively cleaned, so in the right light it is still visible. We have made no attempts to clean the staining off the blade to avoid damaging the remaining grain. There is also the usual runner wear and swirl marks from cleaning. The original factory edge is intact, with no signs of post-manufacture sharpening, and the blade tip is unbent. The acid-etched \u003cstrong\u003eAlles für Deutschland\u003c\/strong\u003e (Everything for Germany) SA motto is deep and crisp, with a fine frosted background that is retained at about 50%.\u003c\/p\u003e\n\u003cp\u003eThe rear is etched with the RZM contract information:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e((RZM))\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eM7 \/ 12\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis marking indicates the dagger was made post-1941 by RZM Dagger contractor \"12\", which records show is the rare maker \u003cem\u003eMax Weyersberg, Waffenfabrik\u003c\/em\u003e (Weapons Factory), a member of the large Weyersberg family of blade makers. The company was located at Katternbergerstrasse 176 in Solingen Germany, the legendary \"City of Blades\" in Western Germany. Per J. Anthony Carter's fine work \u003cem\u003eGERMAN SWORD AND KNIFE MAKERS\u003c\/em\u003e, this company was founded in 1920, and registered with authorities in 1933 as a maker of cutlery, hunting\/sporting knives, and edged weapons. WMW WAFFEN was their main trade name, and was originally pierced with a sword. However later in the period the WMW \/ WAFFEN marking with the enlarged \"M\" was used.\u003c\/p\u003e\n\u003cp\u003eThe \u003cem\u003eReichszeugmeisterei\u003c\/em\u003e (National Quartermaster's Office), or RZM, was was based at the Brown house in Munich and NSDAP party headquarters in Berlin. The RZM ensured that the manufacturers of military items were consistent in design, quality of materials and other characteristics of the items. It also defined standards of design, manufacturing and quality and published an authoritative color chart for textiles. The M7 in the code stands for knives\/daggers, contractor 12 stands for Max Weyersberg of Solingen.\u003c\/p\u003e\n\u003cp\u003eThe scabbard shell is straight throughout and is the mid-war style, which has a black enamel lacquered steel body. This is still in very good shape, retained at over 95%, and showing a lovely pattern of crazing and checking, showing that it has never been repainted. There are a few areas of flaking, where the steel body has oxidized, but overall it's a really great example, with a straight body and just a small dent on the lower edge. The upper and lower fittings are nickel-plated steel, with a great patinated look, showing some plating loss and oxidation, and there is light denting to the lower ball. The throat nicely matches the crossguards, and all fittings have their original dome headed screws.\u003c\/p\u003e\n\u003cp\u003eThe attached later war style belt hanger is in very good condition, with only light wear to the brown leather, which is\u003cstrong\u003e very faintly (RZM) L2 \/ 134 \/ 41\u003c\/strong\u003e marked. This indicates \u003cstrong\u003e1941\u003c\/strong\u003e manufacture, however we unfortunately do not have any information regarding the RZM codes for leather suppliers. The plated steel belt clip is marked with \u003cstrong\u003eM5\/25 ((RZM))\u003c\/strong\u003e, indicating manufacture by \u003cem\u003eChristian Theodor Dicke of Lüdenscheid\u003c\/em\u003e. The spring clip is fully functional, as is the buckle, however the keeper loop is missing.\u003c\/p\u003e\n\u003cp\u003eA lovely NSKK dagger from a very rare maker with an original scabbard and hanger. Ready to display!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBlade Length: 8 3\/4\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOverall length: 13 3\/4”\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCrossguard: 3”\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eScabbard Length: 10”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHistory of the SA and NSKK-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SA or Brown Shirts, were a private political formation which Adolf AH and the NSDAP used to maintain order at organized Party meetings and demonstrations. The group was formed in 1921, and grew to a huge force of nearly 3,000,000 men by the later 1930's. To instill esprit de corps, as well as create employment for the Blade City of Solingen, it was decided each SA man would carry a dagger with his Brown Shirt uniform. Huge quantities needed to be produced to accommodate the demand. The dagger initially was produced of hand-fitted nickel mounts with attractive finished wood grip and brown anodized (a bluing process) finished scabbard.\u003c\/p\u003e\n\u003cp\u003eThe blade was etched with the SA motto, Alles für Deutschland. Examples produced prior to 1935 were stamped with the German sector of the SA group on reverse lower crossguard. Later examples underwent standardization through the RZM ministry. These pieces were produced of cheaper plated zinc-base fittings and scabbards were simply painted brown.\u003c\/p\u003e\n\u003cp\u003ePrior to his \"unmasking\" as a traitor, Ernst Röhm was the leader of the SA. In 1934, he distributed approximately 100,000 SA daggers with his personal inscription on the reverse blade. These daggers were to honor individuals who had served with the SA prior to December, 1931. Other than the inscription, these pieces were identical to the standard M1933 SA dagger. After the Röhm purge, the inscription was ordered to be removed. Many examples were returned to the factory for grinding. Others were simply ground in the field by whatever means were available. Examples will occasionally be encountered with remnants of the original inscription remaining on the blade, but mostly none will remain. Some blades exist with an intact inscription, reflecting only the removal of the Röhm signature. Very very rarely is an example seen with a full, untouched inscription, as the holder would have surely risked a charge of treason.\u003c\/p\u003e\n\u003cp\u003eAfter the purge, the NSKK, which had been a part of the SA, was split off into a separate organization. They retained the same daggers as the SA, however now used a black painted scabbard, and their officer's daggers had a few differences as well. Many already had SA daggers, so these had the scabbards painted black over the original brown anodized finish.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":45174902325317,"sku":"ONJR26JURA019","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/1967AA20-C79B-4651-96D0-0BE3A95D7761.jpg?v=1781724163","url":"https:\/\/www.ima-usa.com\/products\/original-german-wwii-nskk-dagger-by-rare-maker-wmw-max-weyersberg-with-scabbard-and-hanger-rzm-m7-12","provider":"International Military Antiques","version":"1.0","type":"link"}