{"product_id":"original-german-wwii-m42-heer-army-no-decal-helmet-with-1943-dated-58cm-liner-chinstrap-stamped-ckl66","title":"Original German WWII M42 Heer Army No Decal Helmet with 1943 Dated 58cm Liner \u0026 Chinstrap - Stamped CKL66","description":"\u003cp\u003eOriginal Item: Only One Available. This is a lovely all original example of a German Model 42 Steel helmet, as issued to the Wehrmacht \u003cem\u003eHeer\u003c\/em\u003e (army). This stamped sheet steel construction helmet still retains most of the original \u003cem\u003epanzergrau\u003c\/em\u003e (armored gray) paint, which is lightly textured due to the use of aluminum oxide. There is some wear through on the top, as well as the expected wear from service, but it is still retained at over 75%. There is no decal affixed to the shell, as late in the war they were often omitted due to supply and time constraints, especially late in the war. This helmet looks to have seen only light use during the war, and was well cared for.\u003c\/p\u003e\n\u003cp\u003eThe rear interior of the apron has a stamped manufacturer's code and size: \u003cstrong\u003eCKL66\u003c\/strong\u003e over heat lot \u003cstrong\u003e4612\u003c\/strong\u003e, indicating it was manufactured by \u003cem\u003eEisenhüttenwerk AG of Thale\u003c\/em\u003e, located in the Harz district in Saxony, Germany. These markings are somewhat lightly stamped, and can be hard to read. Towards the end of the war, the ET marking was discontinued in favor of three letter code ckl, and moved the marking under the rear skirt. Size 66 is a nice large size that can accommodate liners from 58cm to 59cm or US 7 1\/4 to 7 3\/8. Size 66 shells are much harder to find and are therefore more valuable to a collector.\u003c\/p\u003e\n\u003cp\u003eAll three original liner retaining pins are present, and look to be the type that were painted prior to installation, as they all have smoother paint on the tops, which is retained very well. The interior of the helmet still has the original M31 leather liner present, and all eight fingers are present and supple, with the top tie still present and in lovely condition. The leather is in great shape, showing just a bit scattered staining and wear around the rim. The side of the galvanized steel liner band is marked \u003cstrong\u003e66 n.A. \/ 58\u003c\/strong\u003e, indicating that this is a size 58 liner for a size 66 shell. There is also an in stamped \u003cstrong\u003e58 in a circle\u003c\/strong\u003e on the liner leather itself. The right side displays the full manufacture information, as well as a date:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSCHUBERTH - WERK K.-G.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eD.R.P.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e1943\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBRAUNSCHWEIG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe helmet still retains an original complete chinstrap, with the correct steel buckle and attachment studs. The longer section still has all 13 adjustment holes present, and the buckle is fully functional. There is a an \u003cstrong\u003eRBNr. \u003c\/strong\u003emarking on the longer end, which looks to read \u003cstrong\u003e0\/0494\/0008\u003c\/strong\u003e. The leather is a bit dried out, but still supple.\u003c\/p\u003e\n\u003cp\u003eOverall a great genuine German M42 helmet, complete with a liner and complete chinstrap. This is an item that will only continue to appreciate in value over time.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe first \"modern\" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (\"Gaede\" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale\/Harz, (Iron and Foundry Works), in the spring of 1916.\u003c\/p\u003e\n\u003cp\u003eThese first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.\u003c\/p\u003e\n\u003cp\u003eIn 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.\u003c\/p\u003e\n\u003cp\u003eThe new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.\u003c\/p\u003e\n\u003cp\u003eThe Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.\u003c\/p\u003e\n\u003cp\u003eThe M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation was given by collectors.\u003c\/p\u003e\n\u003cp\u003eIn 1942, Due to wartime demands, the M-42 design was put into production because it was significantly quicker to manufacture. The rolled edge of the M-35 shell was eliminated, creating an unfinished edge along the rim. This edge flared out slightly, along the base of the skirt. The elimination of the rolled edge expedited the manufacturing process and reduced the amount of metal used in each helmet, without sacrificing protection.\u003cbr\u003e\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":44859933032517,"sku":"ONJR26MAAC001","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/534B38DD-8AE1-4B48-AC55-BA096CD80EEB.jpg?v=1775842781","url":"https:\/\/www.ima-usa.com\/products\/original-german-wwii-m42-heer-army-no-decal-helmet-with-1943-dated-58cm-liner-chinstrap-stamped-ckl66","provider":"International Military Antiques","version":"1.0","type":"link"}