{"product_id":"original-german-wwii-m18-transitional-heer-army-single-decal-helmet-with-1940-dated-54cm-liner-and-chinstrap-stamped-et64","title":"Original German WWII M18 Transitional Heer Army Single Decal Helmet with 1940 Dated 54cm Liner and Chinstrap - Stamped ET64","description":"\u003cp\u003eOriginal Item: Only One Available. This is a lovely example of a WWI M18 helmet, which was converted for use by the Third Reich in the 1930s before the widespread issue of the M1935 helmet. This would involve repainting, and the helmet was then fitted with a pre-war M-31 Leather liner, with the correct WWII pattern split pins. It looks like it was probably in service for some time, as it now has a wartime \u003cem\u003ePanzergrau\u003c\/em\u003e (Armor Gray) color lightly textured finish, which now shows wear and flaking. However we also noted that it was originally issued with \"Double Decals\", but when it was repainted at arsenal, both were covered up, and a single silver Heer Army Eagle decal was applied to the new paintjob. The wear to the exterior has however partly exposed the traces of the second decal, and possibly some evidence of the first decal under the eagle, which is retained at about 60%, with areas having completely chipped out. Definitely an interesting example with a great look!\u003c\/p\u003e\n\u003cp\u003eThe shell is stamped \u003cstrong\u003eE.T. 64\u003c\/strong\u003e. indicating that Eisenhüttenwerke Thale A.G., in Thale \/Harz manufactured it. This company made shells in sizes 60 - 68 for the war effort. Size 64 is a nice medium large size that can accommodate liners from 56cm to 57cm or US 7 to 7 1\/8. The inside crown of the shell has a rolling mill mark reading \u003cstrong\u003eS 4 6 N\u003c\/strong\u003e, which is not one that we recognize. The shell retains both of the extended ventilation side lugs, which are the correct extended version with a step for the smaller size 64 shell. This would ensure proper installation of a Stirnpanzer brow plate regardless of shell size.\u003c\/p\u003e\n\u003cp\u003eAll three original liner retaining pins are intact and have complete original paint on the ends. The interior of the helmet still has an original M31 leather liner with all eight fingers present and in good shape, with the top tie string present, though degraded and almost torn through in place.  The leather is a bit worn, showing a nice chestnut brown color, and there is some splitting over the rim. The left side of the galvanized steel liner band is marked \u003cstrong\u003e62 n.A. \/ 54\u003c\/strong\u003e, indicating a size 54 liner for a size 62 shell. This is not really the correct size for this shell, which explains the large gap between the outer band and the shell in some areas. The right side displays the full manufacture information, as well as a date:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSCHUBERTH-WERKE K.-G.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eD. R. P.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e1940\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBRAUNSCHWEIG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a chinstrap fitted to the liner, but it is not the correct WWII type, so it was probably adapted from something else late in the war.\u003c\/p\u003e\n\u003cp\u003eA beautiful, solid example of WWII Reissued M18 helmet with a single Heer Army decal and some interesting characteristics. Comes ready to research and display!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe first \"modern\" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (\"Gaede\" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale\/Harz, in the spring of 1916. These first modern M16 helmets evolved into the M18 helmets by the end of WWI. At the end of WWI it is estimated that Germany had produced about 8,500,000 steel helmets. As a result of the restrictions placed on the German’s by the Treaty of Versailles, which dictated a standing army of only 100,000 personnel, there was an abundant surplus of these helmets, and though they saw widespread use by Freikorps personnel, there was still a stockpile controlled by the Reichswehr.\u003c\/p\u003e\n\u003cp\u003eThese excess helmets underwent minor modifications in 1923 with the addition of provincial identifying shield decals and in 1931 with the development of a new chinstrap and liner system. Although helmet development was ongoing when AH came to power in 1933, the M16 and M18 helmets were still the main headgear worn by the Reichswehr. The helmets remained the same until March 1933 when the provincial shields were discontinued in favour of the national tri-color shield. In 1934 the national eagle shield was introduced, and both the tri-color and eagle shields were applied to the helmets. After the development of the new M35 helmet, the WWI helmets were still issued to second line and training troops well into WWII. The Austrian M16 was almost identical to the German version with the positioning of the chinstrap liner rivets being the most readily identifiable difference.\u003cbr\u003e\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":44668176236613,"sku":"ONAC25SD0104","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/ONAC25SD0104.jpg?v=1771967496","url":"https:\/\/www.ima-usa.com\/products\/original-german-wwii-m18-transitional-heer-army-single-decal-helmet-with-1940-dated-54cm-liner-and-chinstrap-stamped-et64","provider":"International Military Antiques","version":"1.0","type":"link"}