{"product_id":"original-german-wwii-large-m42-single-decal-army-heer-helmet-with-56cm-liner-chinstrap-stamped-ef66","title":"Original German WWII Large M42 Single Decal Army Heer Helmet with 56cm Liner \u0026 Chinstrap - Stamped EF66","description":"\u003cp\u003eOriginal Item: Only One Available. This is a very good condition all original example of a late war German Model 42 Heer Army \"Single Decal\" Steel helmet, with some great period wear. This stamped sheet steel construction helmet was painted a late war Panzergrau dark blue gray color, which is very well-retained with some oxidation wear on one side, for about 80% overall retention. The left side of the helmet features a Heer eagle decal, which is worn but mostly retained. The helmet overall has the fantastic patina that only real wear in the field can give.\u003c\/p\u003e\n\u003cp\u003eOn the under side of the rear skirt, the shell has a stamped manufacturer's code and size \u003cstrong\u003eE.F.66\u003c\/strong\u003e over heat lot \u003cstrong\u003e0917\u003c\/strong\u003e, indicating it was manufactured by \u003cem\u003eEmaillierwerke AG, of Fulda\u003c\/em\u003e, Germany. Later in the war, all markings were moved to the rear of the shell, and some makers switched to three letter codes, but Fulda did not. Size 66 is a nice larger size that can accommodate liners from 58cm to 59cm or US 7 1\/4 to 7 5\/8. Size 66 shells are harder to find and are therefore more valuable to a collector.\u003c\/p\u003e\n\u003cp\u003eAll three liner retaining pins are intact, and they retain much of their original paint. The interior of the helmet still has the original M31 leather liner with all eight of its fingers intact, showing only light wear and staining. The original top tie is still present, and in good shape. The liner band is aluminum, with square aluminum chin strap loops attached to reinforced sides. This is the last pattern before the move to galvanized steel bands. The band is a bit oxidized, so we could not make out all of the markings, only \u003cstrong\u003e59\u003c\/strong\u003e, for Size \u003cstrong\u003e59\u003c\/strong\u003e. However, the liner on this example is marked as a Size \u003cstrong\u003e56\u003c\/strong\u003e, meaning the liner may have been switched out, likely during the period. This is why there is so much space between the inner and outer liner bands.\u003c\/p\u003e\n\u003cp\u003eThe attached chin strap is in good condition, with the finish cracked over much of the surface. It is still soft and supple, however it definitely is structurally sound as it once was. The buckle is a bit oxidized as shown.\u003c\/p\u003e\n\u003cp\u003eOverall a very nice late-war M42 Single Decal Heer Army helmet, completely correct with a lightly worn look! M42 helmets of this quality are always the hardest to find on the market. This is an item that will only continue to appreciate in value over time.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe first \"modern\" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (\"Gaede\" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale\/Harz, (Iron and Foundry Works), in the spring of 1916.\u003c\/p\u003e\n\u003cp\u003eThese first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.\u003c\/p\u003e\n\u003cp\u003eIn 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.\u003c\/p\u003e\n\u003cp\u003eThe new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.\u003c\/p\u003e\n\u003cp\u003eThe Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.\u003c\/p\u003e\n\u003cp\u003eThe M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":42188606210117,"sku":"ONJR24GBRG027","price":1595.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/ONJR24GBRG027__03.jpg?v=1732914279","url":"https:\/\/www.ima-usa.com\/products\/original-german-wwii-large-m42-single-decal-army-heer-helmet-with-56cm-liner-chinstrap-stamped-ef66","provider":"International Military Antiques","version":"1.0","type":"link"}