{"product_id":"original-german-wwi-panel-camouflage-painted-m16-stahlhelm-helmet-with-leather-liner-fragile-chinstrap-marked-bf64","title":"Original German WWI Panel Camouflage Painted M16 Stahlhelm Helmet with Leather Liner \u0026 Fragile Chinstrap - Marked BF64","description":"\u003cp\u003eOriginal Item: Only One Available. This is an excellent original \u003cb\u003eImperial German WWI Model 1916 Stahlhelm\u003c\/b\u003e, retaining approximately \u003cb\u003e75% of its original hand-painted panel camouflage finish\u003c\/b\u003e, with a distinctive pattern closely following the German Army's July 1918 helmet camouflage regulations. The helmet is stamped \u003cb\u003eB.F.64\u003c\/b\u003e, identifying manufacture by \u003cb\u003e\u003ci\u003eF.C. Bellinger of Fulda\u003c\/i\u003e\u003c\/b\u003e in size 64, while the crown retains a faint \u003cb\u003eR 7 4 4\u003c\/b\u003e rolling mill marking associated with \u003cb\u003e\u003ci\u003eStahlwerk Röchling of Völklingen\u003c\/i\u003e\u003c\/b\u003e. Particularly noteworthy is the survival of the original \u003cb\u003eM1916 leather liner with all three leather pads\u003c\/b\u003e, together with the original leather chinstrap, although both have experienced deterioration and some recent repairs. The camouflage paint was sealed by a previous collector many years ago, and the liner was temporarily removed during that process. Unfortunately, the liner retaining pins were incorrectly repositioned during reassembly, and one was subsequently glued into place. Despite these alterations, the helmet retains its distinctive wartime camouflage, original leather interior components, and the principal fittings associated with the M16 pattern.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eGerman Model 1916 Stahlhelm\u003c\/b\u003e represented one of the most important developments in military protective equipment during WWI. When the German Army entered the conflict in August 1914, most soldiers still wore the traditional leather Pickelhaube, which provided little protection against artillery fragments and other hazards of modern warfare. The enormous number of head wounds sustained during the opening campaigns demonstrated the need for a purpose-built steel helmet capable of protecting soldiers in the trenches.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eM16 Stahlhelm\u003c\/b\u003e was introduced into German military service during the \u003cb\u003eVerdun campaign in early 1916\u003c\/b\u003e, replacing the increasingly impractical Pickelhaube in frontline combat. Its distinctive deep steel shell, projecting visor, and extended rear skirt provided considerably greater protection than the earlier leather helmet, particularly against fragments from exploding artillery shells.\u003c\/p\u003e\n\u003cp\u003eThe helmet still has both the dome headed chinstrap retaining rivets, which hold the interior pickelhaube style chin strap lugs in place. It also retains both of the extended ventilation side lugs, which are the correct longer type with a small step for the medium size 64 shell. This would ensure proper installation of a Stirnpanzer brow plate regardless of shell size.\u003c\/p\u003e\n\u003cp\u003eAll three liner split pins, including the correct larger rear pin (installed in the front left), are present, and still retain some of the camouflage paint. The helmet retains its original M1916 leather liner with all three liner pads still attached, although one of the three appears to have broken and was glued into place, so it cannot be removed. There was also electrical tape placed behind the pin arms as “buffers” to prevent oxidation from eating away at the liner any further, a nice detail that shows the care that went into preserving this helmet. All three pillows are gone, and there is some minor repairing to the leather pads. The original chinstrap is retained but cracked and also looks to be glued back together in one spot. It is still very weak, so exercise caution when handling it.\u003c\/p\u003e\n\u003cp\u003eThe shell is stamped \u003cb\u003eB.F.64\u003c\/b\u003e. indicating that \u003cb\u003e\u003ci\u003eF.C. Bellinger of Fulda\u003c\/i\u003e\u003c\/b\u003e manufactured it. This company made shells in sizes 62 and 64 for the war effort. Size 64 is a nice medium large size that can accommodate liners from 56cm to 57cm or US 7 to 7 1\/8. Size 64 shells are harder to find and are therefore more valuable to a collector. The top of the shell has a faint rolling mill mark reading \u003cb\u003eR 7 4 4\u003c\/b\u003e, for steel produced at \u003ci\u003eStahlwerk Röchling in Volkingen\u003c\/i\u003e.\u003c\/p\u003e\n\u003cp\u003eThe principal alterations consist of the \u003cb\u003elater protective coating applied over the camouflage\u003c\/b\u003e, the incorrectly repositioned liner retaining pins, the glued liner component, electrical tape buffers, and repairs to the liner and chinstrap.\u003c\/p\u003e\n\u003cp\u003eThis \u003cb\u003eImperial German WWI BF64 M16 Stahlhelm\u003c\/b\u003e is a particularly interesting example of the late-war camouflage tradition, retaining approximately \u003cb\u003e75% of its original hand-painted panel finish\u003c\/b\u003e and a recognizable configuration consistent with the July 1918 regulations. The manufacturer and rolling mill markings provide important evidence of its production, while the original leather liner and chinstrap preserve components frequently missing from surviving helmets. The helmet retains its principal wartime construction and much of its distinctive original appearance. Its surviving July 1918 Directive camouflage and identifiable manufacturing details make it a noteworthy example for collections focused on German WWI headgear and the development of battlefield camouflage during the First World War.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":46446344667205,"sku":"ONJR26OCNS75","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/677FA950-AD75-407F-88C3-5FF3D19A8446.jpg?v=1794858399","url":"https:\/\/www.ima-usa.com\/products\/original-german-wwi-panel-camouflage-painted-m16-stahlhelm-helmet-with-leather-liner-fragile-chinstrap-marked-bf64","provider":"International Military Antiques","version":"1.0","type":"link"}