{"product_id":"original-german-wwi-model-1916-stick-hand-grenade-by-carl-spaeter-dated-march-1916-stielhandgranate-m16","title":"Original German WWI Model 1916 Stick Hand Grenade by Carl Spaeter - Dated March 1916 - Stielhandgranate M16","description":"\u003cp\u003eOriginal Item: Only One Available. This is a very good condition totally genuine BATF approved inert German WWI M16 Stick Grenade known as the Model 1916 Stielhandgranate. This example has a screw off head with belt hook, and a hollow wooden handle with an end cap at the end. The cap screws off to reveal the hole where the pull string would have been. Due to heavy debris in the threading, it is quite difficult to screw back on. Like all deactivated ordnance, this grenade is \u003cstrong\u003eNot Available for Export.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe side of the handle still retains all of its original markings, including \u003cstrong\u003e5 1\/2 Sek.\u003c\/strong\u003e on one side for the fuze time, and \u003cstrong\u003eCarl Spaeter\u003c\/strong\u003e on the other side for the maker. In addition to these are a third set of markings reading \u003cstrong\u003eSp. 28. 3. 16.\u003c\/strong\u003e for the date of manufacture, \u003cstrong\u003eMarch 28th, 1916.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt stands at 14 inches tall. Overall condition is good, though worn from age. The original markings on the warhead are unfortunately worn away. \u003c\/p\u003e\n\u003cp\u003eThese are exceptionally rare, far more difficult to find than the M1915 and M1917 variations. We are not sure why this is, as the M1915 in theory should be more difficult to find, but this is only the second M1916 we have ever offered, and is by far the better of the two.\u003c\/p\u003e\n\u003cp\u003eThe best M1916 grenade we have ever offered, ready for further research and display!\u003c\/p\u003e\n\u003cp\u003eGermany entered World War I with a single grenade design: a heavy 750-gram (26 oz) ball-shaped fragmentation grenade (Kugelhandgranate) for use only by pioneers in attacking fortifications. It was too heavy for regular use on the battlefield by untrained troops and not suitable for mass production. This left Germany without a standard-issue grenade and improvised designs similar to those of the British were used until a proper grenade could be supplied.\u003c\/p\u003e\n\u003cp\u003eThe 'stick grenade' first appeared in the midst of World War I; it was introduced in 1915 for use by the German Empire's armed forces. As time went on, the design further developed, adding and removing certain features. Aside from its unique and unusual appearance, the Stielhandgranate used a friction igniter system, a method very uncommon in other nations but widely used in German grenades.\u003c\/p\u003e\n\u003cp\u003eDuring World War I, the original design of the Stielhandgranate, under the name M1915 (Model 1915), was in direct technological competition with the British standard-issue Mills bomb series. The first design model of the Mills bomb – the Grenade No. 5 Mk. 1 – was introduced the same year as the German Model 1915, but due to delays in manufacturing it was not widely distributed into general service until 1916. (There was a small period of time where German troops had large supplies of new Model 1915 grenades, while their British opponents only had a very small number.)\u003c\/p\u003e\n\u003cp\u003eAs World War I progressed, the Model 1915 Stielhandgranate was further improved with various changes. These received new designations corresponding for the year of introduction, such as the Model 1916 and the Model 1917.\u003c\/p\u003e\n\u003cp\u003eProduction variations\u003cbr\u003eModel 1915 (M15)\u003cbr\u003eIn 1915, industries of the German Empire designed and began production of the original Stielhandgranate, appropriately named Model 1915 (M15). It utilized a priming system, unlike the percussion cap pin used in most grenades of the period. The easily recognizable \"potato masher\" shape is a result of a number of different styles and choices of the design. The grenade mounted a charge head within a sheet-steel cylinder atop a long hollow-wooden handle. Internally, the explosive – initially ammonal but later approximately 170 g (6.0 oz) of trinitrotoluene filling[3] – was connected to a detonator, and a pull cord ran from the detonator down the length of the hollow handle, emerging from the base. To use, a soldier would simply pull the string downwards, dragging a rough steel rod through the igniter within the fuse. The rod's abrasive contact would cause sparks and a flame to light from within, setting the fuse burning. This fuse took approximately four and a half seconds to reach the detonator before exploding.\u003c\/p\u003e\n\u003cp\u003eThe Stielhandgranate's handle design provided a lever motion in a throw, significantly improving the effective range of use. It could be thrown by the common German infantryman approximately 27 to 37 metres (30 to 40 yd), whereas the British Mills bomb could often only be thrown about 14 metres (15 yd).[4] The British War Office report \"WO 291\/472 Performance and handling of HE grenades\" gives an average figure for a standing throw of a Mills bomb as 27 m (30 yd), (23 m (25 yd) when crouched and 22 m (24 yd) lying prone). One issue that hand grenades of the time had was unpredictable rolling after landing. The German Stielhandgranate did not suffer nearly as much, and in some respects not at all, from this problem as the handle together with the charge head resisted rolling. Instead of rolling straight down a hill or across rough terrain, the Stielhandgranate could create an axis for rotation: it would instead roll from side to side, because the charge head and length of the grenade acted as a balance. However, the additional length of the handle and the irregular overall shape meant that fewer grenades could be carried. It also took longer to prime the grenade than an allied counterpart, such as the Mills Bomb.\u003c\/p\u003e\n\u003cp\u003eThe Stielhandgranate primarily relied on a concussion blast effect, the container creating little fragmentation compared with many grenades of the time, such as the Mills Bomb and the French F1 Grenade, the later World War II American Mk 2 grenade, and the Soviet F1 Grenade. Fragmentation produced shrapnel which could wound enemy infantry over a large area, a factor which made these types of grenade very good for open areas, such as fields, the blasted expanse of no man's land, beaches, spacious trenches, and wide city streets. Concussion grenades, on the other hand, based their wounding ability purely on the shock and blast of the explosives. The Stielhandgranate was extremely effective and reliable in clearing enclosed areas, such as buildings, fortifications, and the fighting compartment of an enemy tank. On the other hand, performance in wide open areas was less than satisfactory. The blast effect could only go so far before dying out, while pieces from an equivalent fragmentation grenade could fly hundreds of metres (it was not unrealistic to expect that metal shrapnel could hit a soldier that the grenade was not intended for, especially in open areas).\u003c\/p\u003e\n\u003cp\u003eModel 1916 M16 Stielhandgranate\u003cbr\u003eThe original M15 grenade suffered from an unfortunate design issue. The pull cord which activated the grenade's fuse extruded from the base and could get caught in debris or clutter on the battlefields of World War I, causing the fuse to be ignited, and the grenade to explode on the belt of an unaware infantryman. This resulted in the introduction of the Model 1916 (M16).\u003c\/p\u003e\n\u003cp\u003eFunctionally identical to the M15, the M16 included a vital change in the base design. A small porcelain ball was placed at the base of the grenade, attached directly to the pull cord. This prevented the string from being exposed. The small bead was partially enveloped in the wooden handle, meaning that some force was needed to pluck it out. Operation was nearly identical, except that a soldier no longer needed to pull the string itself. This improved version resistant to humidity thanks to its stick cap which screwed onto the bottom which concealed the ignition string. It was later improved by riveting a star-shaped plate which helped the unscrewing of the cap in muddy conditions (an oft encountered condition of the trenches).\u003cbr\u003e\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":43805635575877,"sku":"ONAC25SD0305","price":1195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/ONAC25SD0305__01.jpg?v=1760105158","url":"https:\/\/www.ima-usa.com\/products\/original-german-wwi-model-1916-stick-hand-grenade-by-carl-spaeter-dated-march-1916-stielhandgranate-m16","provider":"International Military Antiques","version":"1.0","type":"link"}