{"product_id":"original-excellent-german-m1891-argentine-mauser-rifle-by-ludwig-loewe-made-in-1893-matching-serial-e-8354","title":"Original Excellent German M1891 Argentine Mauser Rifle by Ludwig Loewe made in 1893 - Matching Serial E 8353","description":"\u003cp\u003eOriginal Item: Only one available. This is an excellent lightly used example of the Model 1891 Argentine Mauser rifle, one of many \"export\" models made for foreign governments, all based on the Mauser Model 1889.\u003c\/p\u003e\n\u003cp\u003eThis example, like all of the Argentine Mausers made before 1897, was made by the renowned Company \u003cstrong\u003eLUDWIG LOEWE of BERLIN\u003c\/strong\u003e, which from 1887 onward was actually part owner of Mauser Waffenfabrik. It has fully matching serial numbers, with \u003cstrong\u003eE 8353\u003c\/strong\u003e on the barrel, receiver, stock, bolt, and magazine floor plate. Even the cleaning rod is matched! It's very rare that we see an \u003cstrong\u003eALL MATCHING\u003c\/strong\u003e example like this, with no parts swapped out over the decades.\u003c\/p\u003e\n\u003cp\u003eThe serial numbers were issued sequentially with a single letter prefix. The Ludwig Loewe serial number records for the Argentine contract indicate that serial numbers C5000 to F9999 were produced in 1893, so this rifle was made probably in the Fall of 1893. There were also surplus receivers made, which were then used later. In 1896 Ludwig Loewe founded \u003cem\u003eDeutsche Waffen- und Munitionsfabriken\u003c\/em\u003e, the famous D.W.M., and all rifle receivers made 1897 onward were marked as such.\u003c\/p\u003e\n\u003cp\u003eThe left side of the receiver is marked with the production information:\u003c\/p\u003e\n\u003ccenter\u003e\n\u003cp\u003e\u003cstrong\u003eMAUSER MODELO ARGENTINO 1891.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMANUFACTURA LOEWE BERLIN.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/center\u003e\n\u003cp\u003eThe area of the receiver over the chamber has been ground down to remove Argentine crest, as standard when sold out of service. It was then smoothed out but was not refinished, and now shows a mottled patina. However, the Argentine \"Clasped Hands\" proof is still present on many components, along with a \"Phrygian Cap\" on the left rear receiver. The rest of the finish most of the hardware is still a lovely factory blue, with some small areas of wear and oxidation. There is even still most of the iridescent \"Niter blue\" finish on the magazine follower, nose cap spring, and bolt release spring. The bolt, originally bright steel, has some light staining on the exposed top portion and elsewhere, with a bit of staining inside the receiver. The butt plate has just a bit of wear, with the bluing well retained.\u003c\/p\u003e\n\u003cp\u003eThe rifle cycles well, with a crisp dry fire, and no mechanical issues we can see. The firing pin is still present, however we have no way to check to see if the magazine still feeds correctly. We checked the bore, and it is in excellent nearly unissued condition. It has a bright finish with crisp lands and grooves. There is also barely any sign of a primer burn ring on the bolt, so this rifle saw little to no use.\u003c\/p\u003e\n\u003cp\u003eThe stock is in excellent condition, showing very little sign of having seen actual service. It still has the original oiled finish, with small dents and scuffs consistent with wear from storage. The \u003cstrong\u003eArgentine crest\u003c\/strong\u003e on the right side is still present and crisp.\u003c\/p\u003e\n\u003cp\u003eAnother Military Contract from the Victorian era that Mauser managed to snag from all its European competitors. In excellent condition and ready to display!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYear of Manufacture: 1893\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCaliber: 7.65×53mm Mauser\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCartridge Type: Centerfire Cartridge\u003cbr\u003eBarrel Length: 29 Inches\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOverall Length: 48.5 Inches\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAction type: Bolt-Action\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFeed System: 5 round box magazine\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore on the Model 1891 Argentine Mauser:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter the Mauser brothers finished work on the Model 71\/84 for Germany in 1880, the design team set out to create a small caliber repeater that used smokeless powder. Because of setbacks brought on by Wilhelm Mauser's death, they failed to have the design completed by 1882, and the German Rifle Test Commission (\u003cem\u003eGewehr-Prüfungskommission\u003c\/em\u003e) was formed. The commission preferred to create their own design, which was what became the Gewehr 1888, often called the \"Commission Rifle\".\u003c\/p\u003e\n\u003cp\u003eIn the meantime, Paul Mauser created two different variations of the same rifle, one with a stock strengthened with a barrel shroud and a traditional design following the layout of the 71 series, in hope he might be able to overturn the commission's decision, or at least sell his design to the Kingdom of Bavaria, which adopted its own arms. The two rifles became known as the 89 Belgian (with a barrel shroud) and the 91 Argentine (with a 71 layout) Mausers, identical in their function and feed system. The main features were the ability to use stripper clips to feed the magazine (a revolution in rate of fire), and its rimless cartridge (7.65 Argentine Mauser), advanced for the time.\u003c\/p\u003e\n\u003cp\u003eThe Mauser Company then set about trying to sell this new design. Unfortunately they failed to convince the Commission to reverse its decision, and the attempt to win over Bavaria did not succeed either. However, Mauser already had supplied arms to numerous countries, and when they were looking to update their rifles, they came back to Mauser. At the time, Belgium was looking to bolster its domestic arms industry, and felt that manufacturing a Mauser Design would really help them in this goal. This resulted in the founding of Fabrique Nationale d'Armes de Guerre, owned in part by Ludwig Loewe, to manufacture the Model 1889 Belgian Mauser. This company would go on to become a major arms manufacturer, which exists today as FN Herstal.\u003c\/p\u003e\n\u003cp\u003eAt the same time, the Ottoman Empire had a contract for Model 1877 Turkish Mausers, which were based on the model 1871. The contract however had an \"escape clause\" that allowed them to change the contract in the event of a more advanced Mauser system being developed. This resulted in a new contract for the Model 1890 Turkish Mauser. While this was taking place, the Argentine Small Arms Commission contacted Mauser in 1886 to replace their own Model 71s. Since they wished to keep retraining of their armed forces to a minimum, they went for the Mauser 91, as the operating principles were identical. As with other early Mausers, most such arms were made by the Ludwig Loewe company, who in 1896 joined with other manufactures to form Deutsche Waffen und Munitionsfabriken.\u003c\/p\u003e\n\u003cp\u003eOne of the principal defining features of the Belgian\/Turkish\/Argentine Mauser was its thin sheet steel jacket surrounding the barrel—a rather unusual element not common to any other Mauser mark of note. The jacket was instituted as a feature intended to maintain the effectiveness of the barrel and the solid wooden body over time, otherwise lengthening its service life and long-term accuracy when exposed to excessive firing and battlefield abuse. In spite of this approach, the jacketed barrel proved susceptible to moisture build-up and, therefore, introduced the problem of rust forming on the barrel itself–unbeknown to the user. In addition, the jacket was not perforated in any such way as to relieve the barrel of any heat build-up and consequently proved prone to denting. As such, barrel quality was affected over time regardless of the protective measure. Furthermore, another design flaw of the jacket was its extra steel content. Not only was it expensive but it was also needed in huge quantities to provide for tens of thousands of soldiers. By many accounts, the barrel jacket was not appreciated by its operators who depended on a perfect rifle in conflict. Another defining characteristic, unlike most Mausers, was a spring-loaded cock on closing bolt action resembling that of the British Lee-Metford, which predates the Mauser 1889 by five years. This development allowed for faster firing and was well received.\u003c\/p\u003e","brand":"Original Items","offers":[{"title":"Default Title","offer_id":41517520191557,"sku":"ONSV24SPS019","price":1195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1524\/1342\/files\/ONSV24SPS019__01.jpg?v=1714418931","url":"https:\/\/www.ima-usa.com\/products\/original-excellent-german-m1891-argentine-mauser-rifle-by-ludwig-loewe-made-in-1893-matching-serial-e-8354","provider":"International Military Antiques","version":"1.0","type":"link"}